uodate 20.06

deploy.yml

@@ -8,12 +8,14 @@
 #    - tsg-env-mcn0
     - mrzcpd
     - sapp
+    - tsg_master
     - kni
     - firewall
     - http_healthcheck
     - clotho
     - certstore
     - cert-redis
+    - telegraf_statistic
 
 - hosts: blade-01
   roles:
@@ -44,6 +46,7 @@
     - mrzcpd
     - tsg-env-tun-mode
     - sapp
+    - tsg_master
     - kni
     - firewall
     - http_healthcheck
@@ -51,3 +54,4 @@
     - certstore
     - cert-redis
     - tfe
+    - telegraf_statistic

install_config/group_vars/all.yml

@@ -1,6 +1,10 @@
-########################################
+#########################################
+#####0: Pcap; 1: Inline_device;  2: Allot;  3: ADC_Tun_mode;  4: ATCA;
 tsg_access_type: 0
 
+#####0: Tun_mode;  1: ADC;
+tsg_running_type: 0 
+
 ########################################
 maat_redis_server:
   address: "192.168.40.168"
@@ -67,6 +71,15 @@ mrzcpd:
 mrtunnat:
   lcore_id: 38
 
+nic_data_incoming:
+  name: enp1s0
+  vf0_name: enp1s2
+  vf1_name: enp1s2f1
+  vf2_name: enp1s2f2
+
+VlanFlipping:
+  vlanID_1: 100
+  vlanID_2: 101
 ########################################
 tsg_tun_mode:
   ethname: eth0

roles/certstore/tasks/main.yml

@@ -10,7 +10,7 @@
 - name: install certstore
   yum:
     name:
-      - /tmp/ansible_deploy/certstore-v20.04.3989072-1.el7.x86_64.rpm
+      - /tmp/ansible_deploy/certstore-v20.05.0f61dde-1.el7.centos.x86_64.rpm
     state: present
 
 - name: template certstore configure file

roles/certstore/templates/cert_store.ini.j2

@@ -15,7 +15,7 @@ expire_after = 30
 local_debug = 1
 ca_path = ./cert/tango-ca-v3-trust-ca.pem
 untrusted_ca_path = ./cert/mesalab-ca-untrust.pem
-[NTC_MAAT]
+[MAAT]
 #Configure the load mode,
 #0: using the configuration distribution network
 #1: using local json
@@ -43,3 +43,6 @@ port = 6379
 ip = {{ maat_redis_server.address }}
 port = {{ maat_redis_server.port }}
 dbindex =  {{ maat_redis_server.db }}
+[stat]
+statsd_server=192.168.100.1
+statsd_port=8126

roles/clotho/templates/clotho.conf.j2

@@ -2,7 +2,7 @@
 BROKER_LIST={{ log_kafkabrokers.address }}
 
 [SYSTEM]
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 NIC_NAME={{ tsg_tun_mode.ethname }}
 {% else %}
 NIC_NAME={{ nic_mgr.name }}

roles/firewall/tasks/main.yml

@@ -17,12 +17,14 @@
       - /tmp/ansible_deploy/ssl-1.0.0.73e5273-2.el7.x86_64.rpm
       - /tmp/ansible_deploy/tsg_conn_record-1.0.0.2155660-1.el7.centos.x86_64.rpm
       - /tmp/ansible_deploy/fw_dns_plug-debug-1.0.3.ea8e0f6-1.el7.centos.x86_64.rpm
-      - /tmp/ansible_deploy/fw_ftp_plug-1.0.3.73372b5-2.el7.x86_64.rpm
+      - /tmp/ansible_deploy/fw_ftp_plug-1.1.0.74c9a05-2.el7.x86_64.rpm
       - /tmp/ansible_deploy/fw_ssl_plug-1.0.3.30fcf35-2.el7.x86_64.rpm
-      - /tmp/ansible_deploy/fw_mail_plug-1.0.4.03e1b53-2.el7.x86_64.rpm
-      - /tmp/ansible_deploy/fw_http_plug-1.0.14.2f3b011-2.el7.x86_64.rpm
+      - /tmp/ansible_deploy/fw_mail_plug-1.1.0.a42c5a0-2.el7.x86_64.rpm
+      - /tmp/ansible_deploy/fw_http_plug-1.1.1.d5a0b10-2.el7.x86_64.rpm
       - /tmp/ansible_deploy/capture_packet_plug-debug-1.0.0.-1.el7.x86_64.rpm
       - /tmp/ansible_deploy/clotho-debug-1.0.0.-1.el7.x86_64.rpm
+      - /tmp/ansible_deploy/quic-1.1.4.9c2e0ba-2.el7.x86_64.rpm
+      - /tmp/ansible_deploy/fw_quic_plug-1.0.1.e8cded4-2.el7.x86_64.rpm
 
 - name: "Template the tsgconf/main.conf"
   template:

roles/firewall/templates/capture_packet_plug.conf.j2

@@ -15,7 +15,7 @@ INC_CFG_DIR=capture_packet_rule/inc/index/
 FULL_CFG_DIR=capture_packet_rule/full/index/
 
 [LOG]
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 NIC_NAME={{ tsg_tun_mode.ethname }}
 {% else %}
 NIC_NAME={{ nic_mgr.name }}

roles/firewall/templates/main.conf.j2

@@ -24,7 +24,7 @@ IP_ADDR_TABLE=TSG_SECURITY_ADDR
 
 [TSG_LOG]
 MODE=1
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 NIC_NAME={{ tsg_tun_mode.ethname }}
 {% else %}
 NIC_NAME={{ nic_mgr.name }}
@@ -36,7 +36,7 @@ BROKER_LIST={{ log_kafkabrokers.address }}
 COMMON_FIELD_FILE=tsgconf/tsg_log_field.conf
 
 [STATISTIC]
-CYCLE=0
+CYCLE=1
 TELEGRAF_PORT=8100
 TELEGRAF_IP=127.0.0.1
 OUTPUT_PATH=./tsg_statistic.log

roles/framework/tasks/main.yml

@@ -11,15 +11,15 @@
   vars:
     packages:
       - /tmp/ansible_deploy/libMESA_field_stat-1.0.1.852c2df-1.el7.x86_64.rpm
-      - /tmp/ansible_deploy/libMESA_field_stat2-2.8.6.c183ed6-1.el7.x86_64.rpm
-      - /tmp/ansible_deploy/libMESA_handle_logger-1.0.8.bd5f0ac-1.el7.x86_64.rpm
+      - /tmp/ansible_deploy/libMESA_field_stat2-2.9.0.16ecf3b-2.el7.x86_64.rpm
+      - /tmp/ansible_deploylibMESA_handle_logger-1.0.9.304259e-2.el7.x86_64.rpm/
       - /tmp/ansible_deploy/libMESA_htable-3.10.11.6275308-1.el7.x86_64.rpm
       - /tmp/ansible_deploy/libMESA_prof_load-1.0.5.bf755de-1.el7.x86_64.rpm
       - /tmp/ansible_deploy/libWiredLB-2.0.3.c7d131b-1.el7.x86_64.rpm
       - /tmp/ansible_deploy/libcjson-1.7.8.542ad7f-1.el7.x86_64.rpm
       - /tmp/ansible_deploy/libdocumentanalyze-2.0.4.efdfc29-1.el7.x86_64.rpm
-      - /tmp/ansible_deploy/libmaatframe-2.8.1.8729ebf-2.el7.x86_64.rpm
-      - /tmp/ansible_deploy/librulescan-2.1.7.c27f70d-1.el7.x86_64.rpm
+      - /tmp/ansible_deploy/libmaatframe-2.9.2.7519c63-2.el7.x86_64.rpm
+      - /tmp/ansible_deploy/librulescan-devel-2.2.0.900d2b3-2.el7.x86_64.rpm
       - /tmp/ansible_deploy/libwiredcfg-2.0.2.7ce1eea-1.el7.x86_64.rpm
       - /tmp/ansible_deploy/lz4-1.7.5-3.el7.x86_64.rpm
       - /tmp/ansible_deploy/librdkafka-0.11.4-1.el7.x86_64.rpm

roles/kernel-ml/files/grub

@@ -0,0 +1,8 @@
+GRUB_TIMEOUT=5
+GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
+GRUB_DEFAULT=saved
+GRUB_DISABLE_SUBMENU=true
+GRUB_TERMINAL="serial console"
+GRUB_SERIAL_COMMAND="serial --speed=115200"
+GRUB_CMDLINE_LINUX="crashkernel=auto console=ttyS0,115200 intel_iommu=on iommu=pt pci=realloc,assign-busses"
+GRUB_DISABLE_RECOVERY="true"

roles/kernel-ml/tasks/main.yml

@@ -17,6 +17,20 @@
   command: /usr/sbin/grub2-set-default 0
   when: t_kernel_ml.changed
 
+- name: "copy /etc/default/grub"
+  copy:
+    src: "{{ role_path }}/files/grub"
+    dest: "/etc/default"
+  when: 
+    - tsg_access_type == 4
+    - t_kernel_ml.changed
+
+- name: "grub2-mkconfig"
+  shell: grub2-mkconfig -o /boot/grub2/grub.cfg
+  when:
+    - tsg_access_type == 4
+    - t_kernel_ml.changed
+
 - name: "reboot"
   reboot:
   when: t_kernel_ml.changed

roles/kni/tasks/main.yml

@@ -7,7 +7,7 @@
 - name: "install kni rpms from localhost"
   yum:
     name:
-      - /tmp/ansible_deploy/kni-20.04-1.el7.x86_64.rpm
+      - /tmp/ansible_deploy/kni-20.06-1.el7.x86_64.rpm
     state: present
 
 - name: Template the kni.conf

roles/kni/templates/kni.conf.j2

@@ -2,12 +2,12 @@
 log_path = ./log/kni/kni.log
 log_level = {{ kni.global.log_level }}
 tfe_node_count = {{ kni.global.tfe_node_count }}
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 manage_eth = {{ tsg_tun_mode.ethname }}
 {% else %}
 manage_eth = {{ nic_mgr.name }}
 {% endif %}
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 deploy_mode = tun
 {% else %}
 deploy_mode = normal
@@ -15,8 +15,12 @@ deploy_mode = normal
 tun_name = tun_kni
 src_mac_addr = 00:0e:c6:d6:72:c1
 dst_mac_addr = fe:65:b7:03:50:bd
-{% if tsg_access_type == 0 %}
-{% else %}
+{% if tsg_access_type == 4 %}
+[tfe0]
+enabled = 1
+dev_eth_symbol = {{ nic_data_incoming.vf1_name }}
+ip_addr = 192.168.100.1
+{% elif tsg_running_type == 1 %}
 [tfe0]
 enabled = 1
 dev_eth_symbol = {{ nic_to_tfe.tfe0.name }}
@@ -34,7 +38,7 @@ ip_addr = 192.168.100.4
 {% endif %}
 
 [tfe_cmsg_receiver]
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 listen_eth = {{ tsg_tun_mode.tun_name }}
 {% else %}
 listen_eth = {{ nic_inner_ctrl.name }}
@@ -43,7 +47,7 @@ listen_port = 2475
 
 [watch_dog]
 switch = {{ kni.watch_dog.switch }}
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 listen_eth = {{ tsg_tun_mode.tun_name }}
 {% else %}
 listen_eth = {{ nic_inner_ctrl.name }}

roles/mrzcpd/tasks/main.yml

@@ -6,7 +6,7 @@
 
 - name: "install mrzcpd"
   yum:
-    name: /tmp/ansible_deploy/mrzcpd-4.3.19.f936069-1.el7.x86_64.rpm
+    name: /tmp/ansible_deploy/mrzcpd-4.3.21.26314ca-1.el7.x86_64.rpm
     state: present
 
 - name: "update sysconfig/mrzcpd"
@@ -52,6 +52,15 @@
     - nic_traffic_mirror is not defined
     - tsg_access_type == 3
 
+
+- name: "update mrglobal.conf.ATCA_40G - blade00"
+  template:
+    src: "{{ role_path }}/templates/mrglobal.conf.ATCA_40G.j2"
+    dest: /opt/mrzcpd/etc/mrglobal.conf
+  when: 
+    - nic_traffic_mirror is not defined
+    - tsg_access_type == 4   
+
 - name: "update mrtunnat.conf.inline - blade00"
   template:
     src: "{{ role_path }}/templates/mrtunnat.conf.inline.j2"
@@ -76,24 +85,38 @@
     - nic_traffic_mirror is not defined
     - tsg_access_type == 3
 
+- name: "update mrtunnat.conf.ATCA_40G - blade00"
+  template:
+    src: "{{ role_path }}/templates/mrtunnat.conf.ATCA_40G.j2"
+    dest: /opt/mrzcpd/etc/mrtunnat.conf
+  when: 
+    - nic_traffic_mirror is not defined
+    - tsg_access_type == 4
+
 - name: "enable mrenv"
   systemd:
     name: mrenv
     enabled: yes
     daemon_reload: yes
+  when: 
+    - tsg_access_type != 0
 
 - name: "enable mrzcpd"
   systemd:
     name: mrzcpd
     enabled: yes
     daemon_reload: yes
+  when: 
+    - tsg_access_type != 0
 
 - name: "enable mrtunnat on master"
   systemd:
     name: mrtunnat
     enabled: yes
     daemon_reload: yes
-  when: nic_traffic_mirror is not defined
+  when: 
+    - nic_traffic_mirror is not defined
+    - tsg_access_type != 0
 
 - name: "disable mrtunnat on slave"
   systemd:

roles/mrzcpd/templates/mrglobal.conf.ATCA_40G.j2

@@ -0,0 +1,56 @@
+[device]
+device={{nic_data_incoming.vf0_name}},{{ nic_data_incoming.vf1_name }},vxlan_user,vxlan_fwd
+sz_tunnel=8192
+sz_buffer=0
+
+[device:{{nic_data_incoming.vf0_name}}]
+mtu=4096
+clear_tx_flags=1
+vlan-filter=1
+vlan-strip=1
+vlan-id-allow={{ VlanFlipping.vlanID_1 }},{{ VlanFlipping.vlanID_2 }}
+vlan-pvid=0
+vlan-pvid-mode=2
+hw_strip_crc=1
+
+[device:{{ nic_data_incoming.vf1_name }}]
+mtu=4096
+clear_tx_flags=1
+vlan-filter=1
+vlan-strip=1
+vlan-id-allow=4095
+vlan-pvid=0
+vlan-pvid-mode=2
+hw_strip_crc=1
+
+[service]
+# lcore id for i/o service, use comma to split
+iocore={{ mrzcpd.iocore }}
+distmode=2
+hashmode=0
+
+[eal]
+virtaddr=0x7f40c4a00000
+loglevel=7
+
+[keepalive]
+check_spinlock=0
+
+[ctrlzone]
+ctrlzone0=tunnat,64
+
+[pool]
+create_mode=3
+sz_direct_pktmbuf=4194304
+sz_indirect_pktmbuf=8192
+sz_cache=256
+sz_data=4096
+
+[forward]
+nr_forward_rule=6
+forward_rule_0=pv,{{nic_data_incoming.vf0_name}},{{nic_data_incoming.vf0_name}}
+forward_rule_1=vp,{{nic_data_incoming.vf0_name}},{{nic_data_incoming.vf0_name}}
+forward_rule_2=vv,vxlan_fwd,vxlan_user
+forward_rule_3=vv,vxlan_user,vxlan_fwd
+forward_rule_4=pv,{{ nic_data_incoming.vf1_name }},{{ nic_data_incoming.vf1_name }}
+forward_rule_5=vp,{{ nic_data_incoming.vf1_name }},{{ nic_data_incoming.vf1_name }}

roles/mrzcpd/templates/mrtunnat.conf.ATCA_40G.j2

@@ -0,0 +1,19 @@
+[tunnat]
+lcore_id={{ mrtunnat.lcore_id }}
+appsym=tunnat
+phydev={{nic_data_incoming.vf0_name}}
+virtdev=vxlan_fwd
+nr_max_sessions=524280
+nr_slots=1048576
+expire_time=60
+reverse_tunnel=0
+use_recent_tunnel=0
+use_tuple4_as_sskey=0
+ctrlzone_addr_info_type=2
+
+[vlan_flipping]
+enable=1
+c_router_vlan_id_0={{ VlanFlipping.vlanID_1 }}
+i_router_vlan_id_0={{ VlanFlipping.vlanID_2 }}
+en_mac_flipping_0=0
+

roles/sapp/tasks/main.yml

@@ -7,8 +7,7 @@
 - name: "install sapp rpms from localhost"
   yum:
     name:
-      - /tmp/ansible_deploy/tsg_master-1.0.6.7c22c8d-2.el7.x86_64.rpm
-      - /tmp/ansible_deploy/sapp-4.0.12.f8435d8-x86_64.rpm
+      - /tmp/ansible_deploy/sapp-4.0.14.91cbc1b-x86_64.rpm
     state: present
     skip_broken: yes
 
@@ -41,6 +40,13 @@
     dest: /home/mesasoft/sapp_run/etc/gdev.conf
   when: tsg_access_type == 1
   
+
+- name: "copy sapp.service destination server"
+  copy:
+    src: "{{ role_path }}/files/sapp.service"
+    dest: /usr/lib/systemd/system/
+    mode: 0755
+
 - name: "enable sapp"
   systemd:
     name: sapp

roles/sapp/templates/sapp.toml.j2

@@ -9,13 +9,13 @@
 instance_name = "sapp4"
 
 [CPU]
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 worker_threads=1
 {% else %}
 worker_threads={{ sapp.worker_threads }}
 {% endif %}
 ### note, bind_mask, if you do not want to bind thread to special CPU core, keep it empty as []
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 bind_mask=[]
 {% else %}
 bind_mask=[{{ sapp.bind_mask }}]

roles/telegraf_statistic/files/telegraf_statistic.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=Statistic information
+Documentation=https://github.com/influxdata/telegraf
+After=network.target
+
+[Service]
+EnvironmentFile=-/etc/default/telegraf
+User=telegraf
+ExecStart=/usr/bin/telegraf -config /etc/telegraf/telegraf_statistic.conf -config-directory /etc/telegraf/telegraf_statistic.d $TELEGRAF_OPTS
+ExecReload=/bin/kill -HUP $MAINPID
+Restart=on-failure
+RestartForceExitStatus=SIGPIPE
+KillMode=control-group
+
+[Install]
+WantedBy=multi-user.target

roles/telegraf_statistic/tasks/main.yml

@@ -0,0 +1,28 @@
+- name: "copy telegraf.rpm to destination server"
+  copy:
+    src: "{{ role_path }}/files/telegraf-1.13.0-1.x86_64.rpm"
+    dest: /tmp
+
+- name: "install telegraf"
+  yum:
+    name:
+      - /tmp/telegraf-1.13.0-1.x86_64.rpm
+    state: present
+
+- name: "Templates telegraf.conf"
+  template:
+    src: "{{role_path}}/templates/telegraf_statistic.conf.j2"
+    dest: /etc/telegraf/telegraf_statistic.conf
+  tags: template
+
+- name: "copy telegraf_statistic.service to destination server"
+  copy:
+    src: "{{ role_path }}/files/telegraf_statistic.service"
+    dest: /usr/lib/systemd/system
+    mode: 0755
+
+- name: "Start telegraf"
+  systemd:
+    name: telegraf_statistic.service
+    state: started
+    enabled: yes

roles/telegraf_statistic/templates/telegraf_statistic.conf.j2

@@ -0,0 +1,29 @@
+[global_tags]
+[agent]
+  interval = "30s"
+  round_interval = true
+  metric_batch_size = 1000
+  metric_buffer_limit = 10000
+  collection_jitter = "0s"
+  flush_interval = "10s"
+  flush_jitter = "0s"
+  precision = ""
+  debug = false
+  quiet = false
+  logfile = ""
+  hostname = ""
+  omit_hostname = false
+ [[outputs.file]]
+    files = ["stdout", "/tmp/metrics.out"]
+       data_format = "json"
+ [[outputs.kafka]]
+   brokers = ["{{ log_kafkabrokers.address }}"]
+   topic = "TRAFFIC-METRICS-LOG"
+    data_format = "json"
+ [[outputs.prometheus_client]]
+   listen = ":9273"
+    path = "/metrics"
+ [[inputs.tcp_listener]]
+ [[inputs.udp_listener]]
+ServiceAddress= ":8100"
+data_format = "influx"

roles/tfe/tasks/main.yml

@@ -8,7 +8,7 @@
   yum:
     name:
       - /tmp/ansible_deploy/tfe-kmod-v1.0.5.20200408-1dkms.noarch.rpm
-      - /tmp/ansible_deploy/tfe-4.3.2.374930d-1.el7.x86_64.rpm
+      - /tmp/ansible_deploy/tfe-4.3.4.82f04dc-1.el7.x86_64.rpm
     state: present
 
 - name: "template tfe-env config"

roles/tfe/templates/pangu_pxy.conf.j2

@@ -2,12 +2,13 @@
 log_level=30
 
 [log]
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 nic_name={{ tsg_tun_mode.ethname }}
 {% else %}
 nic_name={{ nic_mgr.name }}
 {% endif %}
 entrance_id=0
+device_id_filepath=/opt/tsg/etc/tsg_sn.json
 kafka_brokerlist= {{ log_kafkabrokers.address }}
 kafka_topic=PROXY-EVENT-LOG
 

roles/tfe/templates/tfe-env-config.j2

@@ -1,14 +1,20 @@
-{% if tsg_access_type == 0 %}
-TFE_DEVICE_DATA_INCOMING={{ tsg_tun_mode.tun_name }}
+{% if tsg_running_type == 0 %}
+TFE_DEVICE_DATA_INCOMING=tun_kni
+{% elif tsg_access_type == 4 %}
+TFE_DEVICE_DATA_INCOMING={{ nic_data_incoming.vf2_name }}
 {% else %}
 TFE_DEVICE_DATA_INCOMING={{ nic_data_incoming.name }}
 {% endif %}
 TFE_LOCAL_MAC_DATA_INCOMING=fe:65:b7:03:50:bd
+{% if tsg_access_type == 4 %}
+TFE_PEER_MAC_DATA_INCOMING=00:0e:c6:d6:72:c1
+{% else %}
 TFE_PEER_MAC_DATA_INCOMING=aa:bb:cc:dd:ee:ff
+{% endif %}
 TFE_LOCAL_IP_DATA_INCOMING=172.16.241.2
 TFE_PEER_IP_DATA_INCOMING=172.16.241.1
 
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 TFE_WATCHDOG_DEVICE={{ tsg_tun_mode.tun_name }}
 TFE_WATCHDOG_IP=192.168.100.1
 {% endif %}

roles/tfe/templates/tfe.conf.j2

@@ -31,7 +31,7 @@ service_cache_expire_seconds=600
 # default 0
 mc_cache_enable=1
 # default eth0
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 mc_cache_eth={{ tsg_tun_mode.tun_name }}
 {% else %}
 mc_cache_eth={{ nic_inner_ctrl.name }}
@@ -50,12 +50,13 @@ cert_store_host= {{ cert_store_server.address }}
 cert_store_port= {{ cert_store_server.port }}
 ca_path=resource/tfe/tango-ca-v3-trust-ca.pem
 untrusted_ca_path=resource/tfe/tango-ca-v3-untrust-ca.pem
+enable_health_check=0
 
 [debug]	
 passthrough_all_tcp=0
 
 [traffic_mirror]
-{% if tsg_access_type == 0 %}
+{% if tsg_running_type == 0 %}
 device=lo
 {% else %}
 device={{ nic_traffic_mirror.name }}
@@ -78,11 +79,11 @@ tcp_ttl_upstream=75
 tcp_ttl_downstream=70
 
 [log]
-level=30
+level=10
 
 [stat]
 statsd_server={{ fs_remote.address }}
 statsd_port={{ fs_remote.port }}
 
 [http]
-loglevel=30
+loglevel=10

roles/tsg-env-tun-mode/templates/setup.j2

@@ -3,9 +3,25 @@ modprobe 8021q
 vconfig add {{ tsg_tun_mode.ethname }} 100
 vconfig set_flag {{ tsg_tun_mode.ethname }}.100 1 1
 ifconfig {{ tsg_tun_mode.ethname }}.100 192.168.100.1 netmask 255.255.255.0 up
+{% if tsg_access_type == 0 %}
 ethtool -K {{ tsg_tun_mode.internal_interface }} tso off
 ethtool -K {{ tsg_tun_mode.internal_interface }} gso off
 ethtool -K {{ tsg_tun_mode.internal_interface }} gro off
 ethtool -K {{ tsg_tun_mode.external_interface }} tso off
 ethtool -K {{ tsg_tun_mode.external_interface }} gso off
 ethtool -K {{ tsg_tun_mode.external_interface }} gro off
+{% elif tsg_access_type == 4 %}
+echo 3 > /sys/class/net/{{ nic_data_incoming.name }}/device/sriov_numvfs
+ip link set {{ nic_data_incoming.name }} vf 1 vlan 4095
+ip link set {{ nic_data_incoming.name }} vf 2 vlan 4095
+ip link set {{ nic_data_incoming.name }} vf 0 trust on
+ip link set {{ nic_data_incoming.name }} vf 1 trust on
+ip link set {{ nic_data_incoming.name }} vf 2 trust on
+ip link set {{ nic_data_incoming.name }} vf 1 mac 00:0e:c6:d6:72:c1
+ip link set {{ nic_data_incoming.name }} vf 2 mac fe:65:b7:03:50:bd
+ip link set {{ nic_data_incoming.name }} vf 0 spoofchk off
+ip link set {{ nic_data_incoming.vf0_name }} up
+ip link set {{ nic_data_incoming.vf1_name }} up
+ip link set {{ nic_data_incoming.vf2_name }} up
+{% endif %}
+

roles/tsg-env-tun-mode/templates/tsg-env_stop.j2

@@ -1,5 +1,8 @@
 #!/bin/bash
 #
-echo 0 >/sys/class/net/ens1/device/sriov_numvfs
+echo 0 >/sys/class/net/{{ tsg_tun_mode.ethname }}/device/sriov_numvfs
 ifconfig {{ tsg_tun_mode.ethname }}.100 down
 vconfig rem {{ tsg_tun_mode.ethname }}.100
+{% if tsg_access_type == 4 %}
+echo 0 >/sys/class/net/{{ nic_data_incoming.name }}/device/sriov_numvfs
+{% endif %}

roles/tsg_master/tasks/main.yml

@@ -6,5 +6,6 @@
 - name: "install tsg_master from localhost"
   yum:
     name:
-      - /tmp/ansible_deploy/tsg_master-debug-1.0.3.a4e2a7c-1.el7.centos.x86_64.rpm
+      - /tmp/ansible_deploy/tsg_master-1.2.8.2aa222c-2.el7.x86_64.rpm
     state: present
+    skip_broken: yes