更新rsyslong.conf

hosts.astana

@@ -1,6 +1,6 @@
 [all:vars]
 ansible_user=root
-rpm_file_name=tsg-cli-1.0.6-1.el7.x86_64.rpm 
+rpm_file_name=tsg-cli-1.0.9.abea4ae-1.el7.x86_64.rpm
 
 [sled-mxn]
 10.4.164.23 SN=CBT2201840103110

hosts.xxg

@@ -1,6 +1,6 @@
 [all:vars]
 ansible_user=root
-rpm_file_name=tsg-cli-1.0.7-1.el7.x86_64.rpm 
+rpm_file_name=tsg-cli-1.0.9.abea4ae-1.el7.x86_64.rpm 
 
 [sled-mxn]
 192.168.40.165 SN=CBT2201925000001

hosts.xxg.new

@@ -1,6 +1,6 @@
 [all:vars]
 ansible_user=root
-rpm_file_name=tsg-cli-1.0.7-1.el7.x86_64.rpm 
+rpm_file_name=tsg-cli-1.0.9.abea4ae-1.el7.x86_64.rpm
 
 [sled-mxn]
 192.168.40.25 SN=CBT2201925000002

roles/tsg-cli-mcn0/files/rsyslog.conf

@@ -0,0 +1,93 @@
+# rsyslog configuration file
+
+# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
+# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
+
+#### MODULES ####
+
+# The imjournal module bellow is now used as a message source instead of imuxsock.
+$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+$ModLoad imjournal # provides access to the systemd journal
+#$ModLoad imklog # reads kernel messages (the same are read from journald)
+#$ModLoad immark  # provides --MARK-- message capability
+
+# Provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# Provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+#### GLOBAL DIRECTIVES ####
+
+# Where to place auxiliary files
+$WorkDirectory /var/lib/rsyslog
+
+# Use default timestamp format
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+$template tsgformat,"%$NOW% %TIMESTAMP:8:15% %HOSTNAME:F,45:3%:<%PRI%> [%syslogseverity-text%] %msg%\n"    
+$ActionFileDefaultTemplate tsgformat
+
+# File syncing capability is disabled by default. This feature is usually not required,
+# not useful and an extreme performance hit
+#$ActionFileEnableSync on
+
+# Include all config files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+# Turn off message reception via local log socket;
+# local messages are retrieved through imjournal now.
+$OmitLocalLogging on
+
+# File to store the position in the journal
+$IMJournalStateFile imjournal.state
+
+
+#### RULES ####
+
+# Log all kernel messages to the console.
+# Logging much else clutters up the screen.
+#kern.*                                                 /dev/console
+
+# Log anything (except mail) of level info or higher.
+# Don't log private authentication messages!
+*.notice;mail.none;authpriv.none;cron.none  /var/log/messages
+
+# The authpriv file has restricted access.
+authpriv.*                                              /var/log/secure
+
+# Log all the mail messages in one place.
+mail.*                                                  -/var/log/maillog
+
+
+# Log cron stuff
+cron.*                                                  /var/log/cron
+
+# Everybody gets emergency messages
+*.emerg                                                 :omusrmsg:*
+
+# Save news errors of level crit and higher in a special file.
+uucp,news.crit                                          /var/log/spooler
+
+# Save boot messages also to boot.log
+local7.*                                                /var/log/boot.log
+
+
+# ### begin forwarding rule ###
+# The statement between the begin ... end define a SINGLE forwarding
+# rule. They belong together, do NOT split them. If you create multiple
+# forwarding rules, duplicate the whole block!
+# Remote Logging (we use TCP for reliable delivery)
+#
+# An on-disk queue is created for this action. If the remote host is
+# down, messages are spooled to disk and sent when it is up again.
+#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
+#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
+#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
+#$ActionQueueType LinkedList   # run asynchronously
+#$ActionResumeRetryCount -1    # infinite retries if host is down
+# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
+.notice @@192.168.100.5:514
+# ### end of the forwarding rule ###

roles/tsg-cli-mcn0/files/tsg-monitor.sh

@@ -13,9 +13,9 @@ killall_uncompleted_cmd(){
     killall -9 -q tsg_monit_app
     killall -9 -q tsg_monit_intercept
     killall -9 -q tsg_monit_interface
-    killall -9 -q tsg_monit_protocol_v3
+    #killall -9 -q tsg_monit_protocol_v3
     killall -9 -q tsg_monit_protocol_v4
-    killall -9 -q tsg_monit_stream_v3
+    #killall -9 -q tsg_monit_stream_v3
     killall -9 -q tsg_monit_stream_v4
 }
 
@@ -28,9 +28,9 @@ start_background_cmd(){
     /opt/tsg/tsg-monitor/tsg_monit_app > /dev/null &
     /opt/tsg/tsg-monitor/tsg_monit_intercept > /dev/null &
     /opt/tsg/tsg-monitor/tsg_monit_interface > /dev/null &
-    /opt/tsg/tsg-monitor/tsg_monit_protocol_v3 > /dev/null &
+    #/opt/tsg/tsg-monitor/tsg_monit_protocol_v3 > /dev/null &
     /opt/tsg/tsg-monitor/tsg_monit_protocol_v4 > /dev/null &
-    /opt/tsg/tsg-monitor/tsg_monit_stream_v3 > /dev/null &
+    #/opt/tsg/tsg-monitor/tsg_monit_stream_v3 > /dev/null &
     /opt/tsg/tsg-monitor/tsg_monit_stream_v4 > /dev/null &    
 }
 

roles/tsg-cli-mcn0/tasks/main.yml

@@ -41,3 +41,7 @@
     enabled: yes
     daemon_reload: yes
 
+- name: "copy rsyslog.conf to destination server"
+  synchronize:
+    src: "{{ role_path }}/files/rsyslog.conf"
+    dest: "/etc/"

roles/tsg-cli-mcn1/files/rsyslog.conf

@@ -0,0 +1,93 @@
+# rsyslog configuration file
+
+# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
+# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
+
+#### MODULES ####
+
+# The imjournal module bellow is now used as a message source instead of imuxsock.
+$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+$ModLoad imjournal # provides access to the systemd journal
+#$ModLoad imklog # reads kernel messages (the same are read from journald)
+#$ModLoad immark  # provides --MARK-- message capability
+
+# Provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# Provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+#### GLOBAL DIRECTIVES ####
+
+# Where to place auxiliary files
+$WorkDirectory /var/lib/rsyslog
+
+# Use default timestamp format
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+$template tsgformat,"%$NOW% %TIMESTAMP:8:15% %HOSTNAME:F,45:3%:<%PRI%> [%syslogseverity-text%] %msg%\n"    
+$ActionFileDefaultTemplate tsgformat
+
+# File syncing capability is disabled by default. This feature is usually not required,
+# not useful and an extreme performance hit
+#$ActionFileEnableSync on
+
+# Include all config files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+# Turn off message reception via local log socket;
+# local messages are retrieved through imjournal now.
+$OmitLocalLogging on
+
+# File to store the position in the journal
+$IMJournalStateFile imjournal.state
+
+
+#### RULES ####
+
+# Log all kernel messages to the console.
+# Logging much else clutters up the screen.
+#kern.*                                                 /dev/console
+
+# Log anything (except mail) of level info or higher.
+# Don't log private authentication messages!
+*.notice;mail.none;authpriv.none;cron.none  /var/log/messages
+
+# The authpriv file has restricted access.
+authpriv.*                                              /var/log/secure
+
+# Log all the mail messages in one place.
+mail.*                                                  -/var/log/maillog
+
+
+# Log cron stuff
+cron.*                                                  /var/log/cron
+
+# Everybody gets emergency messages
+*.emerg                                                 :omusrmsg:*
+
+# Save news errors of level crit and higher in a special file.
+uucp,news.crit                                          /var/log/spooler
+
+# Save boot messages also to boot.log
+local7.*                                                /var/log/boot.log
+
+
+# ### begin forwarding rule ###
+# The statement between the begin ... end define a SINGLE forwarding
+# rule. They belong together, do NOT split them. If you create multiple
+# forwarding rules, duplicate the whole block!
+# Remote Logging (we use TCP for reliable delivery)
+#
+# An on-disk queue is created for this action. If the remote host is
+# down, messages are spooled to disk and sent when it is up again.
+#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
+#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
+#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
+#$ActionQueueType LinkedList   # run asynchronously
+#$ActionResumeRetryCount -1    # infinite retries if host is down
+# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
+.notice @@192.168.100.5:514
+# ### end of the forwarding rule ###

roles/tsg-cli-mcn1/tasks/main.yml

@@ -40,3 +40,8 @@
     name: tsg-monitor
     enabled: yes
     daemon_reload: yes
+
+- name: "copy rsyslog.conf to destination server"
+  synchronize:
+    src: "{{ role_path }}/files/rsyslog.conf"
+    dest: "/etc/"

roles/tsg-cli-mcn2/files/rsyslog.conf

@@ -0,0 +1,93 @@
+# rsyslog configuration file
+
+# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
+# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
+
+#### MODULES ####
+
+# The imjournal module bellow is now used as a message source instead of imuxsock.
+$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+$ModLoad imjournal # provides access to the systemd journal
+#$ModLoad imklog # reads kernel messages (the same are read from journald)
+#$ModLoad immark  # provides --MARK-- message capability
+
+# Provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# Provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+#### GLOBAL DIRECTIVES ####
+
+# Where to place auxiliary files
+$WorkDirectory /var/lib/rsyslog
+
+# Use default timestamp format
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+$template tsgformat,"%$NOW% %TIMESTAMP:8:15% %HOSTNAME:F,45:3%:<%PRI%> [%syslogseverity-text%] %msg%\n"    
+$ActionFileDefaultTemplate tsgformat
+
+# File syncing capability is disabled by default. This feature is usually not required,
+# not useful and an extreme performance hit
+#$ActionFileEnableSync on
+
+# Include all config files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+# Turn off message reception via local log socket;
+# local messages are retrieved through imjournal now.
+$OmitLocalLogging on
+
+# File to store the position in the journal
+$IMJournalStateFile imjournal.state
+
+
+#### RULES ####
+
+# Log all kernel messages to the console.
+# Logging much else clutters up the screen.
+#kern.*                                                 /dev/console
+
+# Log anything (except mail) of level info or higher.
+# Don't log private authentication messages!
+*.notice;mail.none;authpriv.none;cron.none  /var/log/messages
+
+# The authpriv file has restricted access.
+authpriv.*                                              /var/log/secure
+
+# Log all the mail messages in one place.
+mail.*                                                  -/var/log/maillog
+
+
+# Log cron stuff
+cron.*                                                  /var/log/cron
+
+# Everybody gets emergency messages
+*.emerg                                                 :omusrmsg:*
+
+# Save news errors of level crit and higher in a special file.
+uucp,news.crit                                          /var/log/spooler
+
+# Save boot messages also to boot.log
+local7.*                                                /var/log/boot.log
+
+
+# ### begin forwarding rule ###
+# The statement between the begin ... end define a SINGLE forwarding
+# rule. They belong together, do NOT split them. If you create multiple
+# forwarding rules, duplicate the whole block!
+# Remote Logging (we use TCP for reliable delivery)
+#
+# An on-disk queue is created for this action. If the remote host is
+# down, messages are spooled to disk and sent when it is up again.
+#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
+#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
+#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
+#$ActionQueueType LinkedList   # run asynchronously
+#$ActionResumeRetryCount -1    # infinite retries if host is down
+# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
+.notice @@192.168.100.5:514
+# ### end of the forwarding rule ###

roles/tsg-cli-mcn2/tasks/main.yml

@@ -40,3 +40,8 @@
     name: tsg-monitor
     enabled: yes
     daemon_reload: yes
+
+- name: "copy rsyslog.conf to destination server"
+  synchronize:
+    src: "{{ role_path }}/files/rsyslog.conf"
+    dest: "/etc/"

roles/tsg-cli-mcn3/files/rsyslog.conf

@@ -0,0 +1,93 @@
+# rsyslog configuration file
+
+# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
+# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
+
+#### MODULES ####
+
+# The imjournal module bellow is now used as a message source instead of imuxsock.
+$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+$ModLoad imjournal # provides access to the systemd journal
+#$ModLoad imklog # reads kernel messages (the same are read from journald)
+#$ModLoad immark  # provides --MARK-- message capability
+
+# Provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# Provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+#### GLOBAL DIRECTIVES ####
+
+# Where to place auxiliary files
+$WorkDirectory /var/lib/rsyslog
+
+# Use default timestamp format
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+$template tsgformat,"%$NOW% %TIMESTAMP:8:15% %HOSTNAME:F,45:3%:<%PRI%> [%syslogseverity-text%] %msg%\n"    
+$ActionFileDefaultTemplate tsgformat
+
+# File syncing capability is disabled by default. This feature is usually not required,
+# not useful and an extreme performance hit
+#$ActionFileEnableSync on
+
+# Include all config files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+# Turn off message reception via local log socket;
+# local messages are retrieved through imjournal now.
+$OmitLocalLogging on
+
+# File to store the position in the journal
+$IMJournalStateFile imjournal.state
+
+
+#### RULES ####
+
+# Log all kernel messages to the console.
+# Logging much else clutters up the screen.
+#kern.*                                                 /dev/console
+
+# Log anything (except mail) of level info or higher.
+# Don't log private authentication messages!
+*.notice;mail.none;authpriv.none;cron.none  /var/log/messages
+
+# The authpriv file has restricted access.
+authpriv.*                                              /var/log/secure
+
+# Log all the mail messages in one place.
+mail.*                                                  -/var/log/maillog
+
+
+# Log cron stuff
+cron.*                                                  /var/log/cron
+
+# Everybody gets emergency messages
+*.emerg                                                 :omusrmsg:*
+
+# Save news errors of level crit and higher in a special file.
+uucp,news.crit                                          /var/log/spooler
+
+# Save boot messages also to boot.log
+local7.*                                                /var/log/boot.log
+
+
+# ### begin forwarding rule ###
+# The statement between the begin ... end define a SINGLE forwarding
+# rule. They belong together, do NOT split them. If you create multiple
+# forwarding rules, duplicate the whole block!
+# Remote Logging (we use TCP for reliable delivery)
+#
+# An on-disk queue is created for this action. If the remote host is
+# down, messages are spooled to disk and sent when it is up again.
+#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
+#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
+#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
+#$ActionQueueType LinkedList   # run asynchronously
+#$ActionResumeRetryCount -1    # infinite retries if host is down
+# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
+.notice @@192.168.100.5:514
+# ### end of the forwarding rule ###

roles/tsg-cli-mcn3/tasks/main.yml

@@ -40,3 +40,8 @@
     name: tsg-monitor
     enabled: yes
     daemon_reload: yes
+
+- name: "copy rsyslog.conf to destination server"
+  synchronize:
+    src: "{{ role_path }}/files/rsyslog.conf"
+    dest: "/etc/"

roles/tsg-cli-mxn/files/rsyslog.conf

@@ -0,0 +1,93 @@
+# rsyslog configuration file
+
+# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
+# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
+
+#### MODULES ####
+
+# The imjournal module bellow is now used as a message source instead of imuxsock.
+$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
+$ModLoad imjournal # provides access to the systemd journal
+#$ModLoad imklog # reads kernel messages (the same are read from journald)
+#$ModLoad immark  # provides --MARK-- message capability
+
+# Provides UDP syslog reception
+$ModLoad imudp
+$UDPServerRun 514
+
+# Provides TCP syslog reception
+$ModLoad imtcp
+$InputTCPServerRun 514
+
+
+#### GLOBAL DIRECTIVES ####
+
+# Where to place auxiliary files
+$WorkDirectory /var/lib/rsyslog
+
+# Use default timestamp format
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+$template tsgformat,"%$NOW% %TIMESTAMP:8:15% %HOSTNAME:F,45:3%:<%PRI%> [%syslogseverity-text%] %msg%\n"    
+$ActionFileDefaultTemplate tsgformat
+
+# File syncing capability is disabled by default. This feature is usually not required,
+# not useful and an extreme performance hit
+#$ActionFileEnableSync on
+
+# Include all config files in /etc/rsyslog.d/
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+# Turn off message reception via local log socket;
+# local messages are retrieved through imjournal now.
+$OmitLocalLogging on
+
+# File to store the position in the journal
+$IMJournalStateFile imjournal.state
+
+
+#### RULES ####
+
+# Log all kernel messages to the console.
+# Logging much else clutters up the screen.
+#kern.*                                                 /dev/console
+
+# Log anything (except mail) of level info or higher.
+# Don't log private authentication messages!
+*.notice;mail.none;authpriv.none;cron.none  /var/log/messages
+
+# The authpriv file has restricted access.
+authpriv.*                                              /var/log/secure
+
+# Log all the mail messages in one place.
+mail.*                                                  -/var/log/maillog
+
+
+# Log cron stuff
+cron.*                                                  /var/log/cron
+
+# Everybody gets emergency messages
+*.emerg                                                 :omusrmsg:*
+
+# Save news errors of level crit and higher in a special file.
+uucp,news.crit                                          /var/log/spooler
+
+# Save boot messages also to boot.log
+local7.*                                                /var/log/boot.log
+
+
+# ### begin forwarding rule ###
+# The statement between the begin ... end define a SINGLE forwarding
+# rule. They belong together, do NOT split them. If you create multiple
+# forwarding rules, duplicate the whole block!
+# Remote Logging (we use TCP for reliable delivery)
+#
+# An on-disk queue is created for this action. If the remote host is
+# down, messages are spooled to disk and sent when it is up again.
+#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
+#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
+#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
+#$ActionQueueType LinkedList   # run asynchronously
+#$ActionResumeRetryCount -1    # infinite retries if host is down
+# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
+#*.* @@192.168.40.165:514
+# ### end of the forwarding rule ###

roles/tsg-cli-mxn/tasks/main.yml

@@ -35,3 +35,8 @@
     name: tsg-monitor
     enabled: yes
     daemon_reload: yes
+
+- name: "copy rsyslog.conf to destination server"
+  synchronize:
+    src: "{{ role_path }}/files/rsyslog.conf"
+    dest: "/etc/"