[SYSTEM]
#1:print on screen, 0:don't
DEBUG_SWITCH = 1
RUN_LOG_PATH = "conf/zlog.conf"

[breakpad]
disable_coredump=0
enable_breakpad=1
breakpad_minidump_dir=/tmp/certstore/crashreport
enable_breakpad_upload=0
breakpad_upload_url=http://127.0.0.1/

[CONFIG]
#Number of running threads
thread-nu = 4
#1 rsync, 0 sync
mode=1
#Local default root certificate is valid for 30 days by default
expire_after = 30
#Local default root certificate path
local_debug = 0
ca_path = ./cert/tsg-ca-v3-trust-ca.pem
untrusted_ca_path = ./cert/tsg-ca-v3-untrust-ca.pem

[MAAT]
#Configure the load mode,
#0: using the configuration distribution network
#1: using local json
#2: using Redis reads
maat_json_switch=2
#When the loading mode is sent to the network, set the scanning configuration modification interval (s).
effective_interval=1
#Specify the location of the configuration library table file
table_info=./conf/table_info.conf
#Incremental profile path
inc_cfg_dir=./rule/inc/index
#Full profile path
full_cfg_dir=./rule/full/index
#Json file path when json schema is used
pxy_obj_keyring=./conf/pxy_obj_keyring.json

[LIBEVENT]
#Local monitor port number, default is 9991
port = 9991

[CERTSTORE_REDIS]
#The Redis server IP address and port number where the certificate is stored locally
ip = 127.0.0.1
port = 6379

[MAAT_REDIS]
#Maat monitors the Redsi server IP address and port number
ip = 192.168.11.243
port = 6379
dbindex = 4

[stat]
statsd_server=192.168.10.72
statsd_port=8126
statsd_set_prometheus_port=9001
statsd_set_prometheus_url_path=/certstore_prometheus

