diff --git a/roles/tsg-env-mcn/files/env-mcn0/setup b/roles/tsg-env-mcn/files/env-mcn0/setup
new file mode 100644
index 0000000..473e5a0
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn0/setup
@@ -0,0 +1,132 @@
+#!/bin/bash
+# set -x
+
+CURRENT_PATH=`dirname $0`
+TP_SVR=192.168.100.5
+TP_PORT=10000
+REMOTE_CONTROL_BIN=switch_control_client_non_block
+
+function get_netdev_by_pci()
+{
+  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
+  for i in ${DEV_LIST}
+  do
+    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
+    if [ $? -eq 0 ];then
+      TARGET=${i}
+      break
+    fi
+  done
+
+  echo ${TARGET}
+}
+
+function pf_setup()
+{
+  ifconfig ens1 up
+
+  modprobe 8021q
+  vconfig add ens1 100
+  vconfig set_flag ens1.100 1 1
+  ifconfig ens1.100 192.168.100.1 netmask 255.255.255.0 up
+  sleep 1
+}
+
+function vf_setup()
+{
+  echo 8 > /sys/class/net/ens1/device/sriov_numvfs
+  sleep 5
+
+  ifconfig ens1f3 up
+  ip link set ens1 vf 2 vlan 200
+  ifconfig ens1f3 192.168.200.1 netmask 255.255.255.0
+
+  ifconfig ens1f1 up
+  ifconfig ens1f2 up
+  ifconfig ens1f3 up
+  ifconfig ens1f4 up
+  ifconfig ens1f5 up
+  ifconfig ens1f6 up
+  ifconfig ens1f7 up
+  ifconfig enp1s1 up
+
+  sleep 5
+}
+
+function bring_down_pfvf()
+{
+  echo 0 > /sys/class/net/ens1/device/sriov_numvfs
+  ifconfig ens1 down
+  sleep 3
+}
+
+
+# Main loop
+while :
+do
+  FAIL_FLAG=0
+
+  # Make sure PF is valid
+  ping ${TP_SVR} -c 1 
+  if [ $? -ne 0 ];then
+    echo "Please make sure switch board is up."
+    bring_down_pfvf
+    pf_setup
+    continue
+  fi
+
+  # Make sure TestPoint is up.
+  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
+  if [ $? -ne 0 ];then
+    echo "Cannot reach TestPoint!"
+    echo "Please make sure TestPoint is up and in remote-listen mode."
+    sleep 5
+    continue
+  fi
+
+  # Create VFs and get MAC addresses
+  vf_setup
+
+  PF=`get_netdev_by_pci 01:00.0`
+  VF1=`get_netdev_by_pci 01:00.1`
+  VF2=`get_netdev_by_pci 01:00.2`
+  VF3=`get_netdev_by_pci 01:00.3`
+  VF4=`get_netdev_by_pci 01:00.4`
+  VF5=`get_netdev_by_pci 01:00.5`
+  VF6=`get_netdev_by_pci 01:00.6`
+  VF7=`get_netdev_by_pci 01:00.7`
+  VF8=`get_netdev_by_pci 01:01.0`
+
+  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
+  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
+  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
+  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
+  MAC5=`ifconfig ${VF5} |grep ether |awk -F' ' '{print $2}'`
+  MAC6=`ifconfig ${VF6} |grep ether |awk -F' ' '{print $2}'`
+  MAC7=`ifconfig ${VF7} |grep ether |awk -F' ' '{print $2}'`
+  MAC8=`ifconfig ${VF8} |grep ether |awk -F' ' '{print $2}'`
+  MAC9=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
+
+  # Make sure VFs are valid
+  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
+
+  for i in ${MAC1} ${MAC2} ${MAC3} ${MAC4} ${MAC5} ${MAC6} ${MAC7} ${MAC8} ${MAC9}
+  do 
+    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
+    if [ $? -ne 0 ];then
+      echo "MAC ${i} is not in table!"
+      FAIL_FLAG=1
+      break
+    fi
+  done
+
+  if [ ${FAIL_FLAG} -eq 1 ];then
+      bring_down_pfvf
+      continue
+  fi
+
+  echo "PF/VF setup successful."
+  exit 0
+done
+
+
diff --git a/roles/tsg-env-mcn/files/env-mcn0/switch_control_client_non_block b/roles/tsg-env-mcn/files/env-mcn0/switch_control_client_non_block
new file mode 100644
index 0000000..5cdba48
Binary files /dev/null and b/roles/tsg-env-mcn/files/env-mcn0/switch_control_client_non_block differ
diff --git a/roles/tsg-env-mcn/files/env-mcn0/tsg-env.service b/roles/tsg-env-mcn/files/env-mcn0/tsg-env.service
new file mode 100644
index 0000000..e100bb8
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn0/tsg-env.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=tsg sled-mcn0 env init
+Requires=network.target
+After=network.target
+Before=mrenv.service
+
+[Service]
+ExecStart=/opt/tsg/env/setup
+ExecStop=/opt/tsg/env/tsg-env_stop
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+RequiredBy=mrenv.service
diff --git a/roles/tsg-env-mcn/files/env-mcn0/tsg-env_stop b/roles/tsg-env-mcn/files/env-mcn0/tsg-env_stop
new file mode 100644
index 0000000..1048f28
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn0/tsg-env_stop
@@ -0,0 +1,6 @@
+#!/bin/bash
+#
+echo 0 >/sys/class/net/ens1/device/sriov_numvfs
+ifconfig ens1.100 down
+vconfig rem ens1.100
+ifconfig ens1 down
diff --git a/roles/tsg-env-mcn/files/env-mcn1/setup b/roles/tsg-env-mcn/files/env-mcn1/setup
new file mode 100644
index 0000000..09331cd
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn1/setup
@@ -0,0 +1,115 @@
+#!/bin/bash
+# set -x
+
+CURRENT_PATH=`dirname $0`
+TP_SVR=192.168.100.5
+TP_PORT=10000
+REMOTE_CONTROL_BIN=switch_control_client_non_block
+modprobe 8021q
+
+function get_netdev_by_pci()
+{
+  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
+  for i in ${DEV_LIST}
+  do
+    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
+    if [ $? -eq 0 ];then
+      TARGET=${i}
+      break
+    fi
+  done
+
+  echo ${TARGET}
+}
+
+function pf_setup()
+{
+  ifconfig ens1 up
+  vconfig add ens1 100
+  vconfig set_flag ens1.100 1 1
+  ifconfig ens1.100 192.168.100.2 netmask 255.255.255.0 up
+  sleep 1
+}
+
+function vf_setup()
+{
+  echo 4 > /sys/class/net/ens1/device/sriov_numvfs
+  sleep 5
+
+  ifconfig ens1f3 up
+  ip link set ens1 vf 2 vlan 200
+  ifconfig ens1f3 192.168.200.2 netmask 255.255.255.0
+
+  ifconfig ens1f1 up
+  ifconfig ens1f2 up
+  ifconfig ens1f3 up
+  ifconfig ens1f4 up
+  sleep 5
+}
+
+function bring_down_pfvf()
+{
+  echo 0 > /sys/class/net/ens1/device/sriov_numvfs
+  ifconfig ens1 down
+  sleep 3
+}
+
+# Main loop
+while :
+do
+  FAIL_FLAG=0
+
+  # Make sure PF is valid
+  ping ${TP_SVR} -c 1 
+  if [ $? -ne 0 ];then
+    echo "Please make sure switch board is up."
+    bring_down_pfvf
+    pf_setup
+    continue
+  fi
+
+  # Make sure TestPoint is up.
+  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
+  if [ $? -ne 0 ];then
+    echo "Cannot reach TestPoint!"
+    echo "Please make sure TestPoint is up and in remote-listen mode."
+    sleep 5
+    continue
+  fi
+
+  # Create VFs and get MAC addresses
+  vf_setup
+
+  PF=`get_netdev_by_pci 01:00.0`
+  VF1=`get_netdev_by_pci 01:00.1`
+  VF2=`get_netdev_by_pci 01:00.2`
+  VF3=`get_netdev_by_pci 01:00.3`
+  VF4=`get_netdev_by_pci 01:00.4`
+
+  MAC0=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
+  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
+  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
+  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
+  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
+
+  # Make sure VFs are valid
+  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
+
+  for i in ${MAC0} ${MAC1} ${MAC2} ${MAC3} ${MAC4}
+  do 
+    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
+    if [ $? -ne 0 ];then
+      echo "MAC ${i} is not in table!"
+      FAIL_FLAG=1
+      break
+    fi
+  done
+
+  if [ ${FAIL_FLAG} -eq 1 ];then
+      bring_down_pfvf
+      continue
+  fi
+
+  echo "PF/VF setup successful."
+  exit 0
+done
diff --git a/roles/tsg-env-mcn/files/env-mcn1/switch_control_client_non_block b/roles/tsg-env-mcn/files/env-mcn1/switch_control_client_non_block
new file mode 100644
index 0000000..5cdba48
Binary files /dev/null and b/roles/tsg-env-mcn/files/env-mcn1/switch_control_client_non_block differ
diff --git a/roles/tsg-env-mcn/files/env-mcn1/tsg-env.service b/roles/tsg-env-mcn/files/env-mcn1/tsg-env.service
new file mode 100644
index 0000000..c8ce8a8
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn1/tsg-env.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=tsg sled-mcn1 env init
+Requires=network.target
+After=network.target
+Before=tfe-env.service mrenv.service
+
+[Service]
+ExecStart=/opt/tsg/env/setup
+ExecStop=/opt/tsg/env/tsg-env_stop
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+RequiredBy=tfe-env.service mrenv.service
\ No newline at end of file
diff --git a/roles/tsg-env-mcn/files/env-mcn1/tsg-env_stop b/roles/tsg-env-mcn/files/env-mcn1/tsg-env_stop
new file mode 100644
index 0000000..1048f28
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn1/tsg-env_stop
@@ -0,0 +1,6 @@
+#!/bin/bash
+#
+echo 0 >/sys/class/net/ens1/device/sriov_numvfs
+ifconfig ens1.100 down
+vconfig rem ens1.100
+ifconfig ens1 down
diff --git a/roles/tsg-env-mcn/files/env-mcn2/setup b/roles/tsg-env-mcn/files/env-mcn2/setup
new file mode 100644
index 0000000..8d3985a
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn2/setup
@@ -0,0 +1,115 @@
+#!/bin/bash
+# set -x
+
+CURRENT_PATH=`dirname $0`
+TP_SVR=192.168.100.5
+TP_PORT=10000
+REMOTE_CONTROL_BIN=switch_control_client_non_block
+modprobe 8021q
+
+function get_netdev_by_pci()
+{
+  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
+  for i in ${DEV_LIST}
+  do
+    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
+    if [ $? -eq 0 ];then
+      TARGET=${i}
+      break
+    fi
+  done
+
+  echo ${TARGET}
+}
+
+function pf_setup()
+{
+  ifconfig ens8 up
+  vconfig add ens8 100
+  vconfig set_flag ens8.100 1 1
+  ifconfig ens8.100 192.168.100.3 netmask 255.255.255.0 up
+  sleep 1
+}
+
+function vf_setup()
+{
+  echo 4 > /sys/class/net/ens8/device/sriov_numvfs
+  sleep 5
+
+  ifconfig ens8f3 up
+  ip link set ens8 vf 2 vlan 200
+  ifconfig ens8f3 192.168.200.3 netmask 255.255.255.0
+
+  ifconfig ens8f1 up
+  ifconfig ens8f2 up
+  ifconfig ens8f3 up
+  ifconfig ens8f4 up
+  sleep 5
+}
+
+function bring_down_pfvf()
+{
+  echo 0 > /sys/class/net/ens8/device/sriov_numvfs
+  ifconfig ens8 down
+  sleep 3
+}
+
+# Main loop
+while :
+do
+  FAIL_FLAG=0
+
+  # Make sure PF is valid
+  ping ${TP_SVR} -c 1 
+  if [ $? -ne 0 ];then
+    echo "Please make sure switch board is up."
+    bring_down_pfvf
+    pf_setup
+    continue
+  fi
+
+  # Make sure TestPoint is up.
+  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
+  if [ $? -ne 0 ];then
+    echo "Cannot reach TestPoint!"
+    echo "Please make sure TestPoint is up and in remote-listen mode."
+    sleep 5
+    continue
+  fi
+
+  # Create VFs and get MAC addresses
+  vf_setup
+
+  PF=`get_netdev_by_pci 85:00.0`
+  VF1=`get_netdev_by_pci 85:00.1`
+  VF2=`get_netdev_by_pci 85:00.2`
+  VF3=`get_netdev_by_pci 85:00.3`
+  VF4=`get_netdev_by_pci 85:00.4`
+
+  MAC0=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
+  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
+  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
+  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
+  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
+
+  # Make sure VFs are valid
+  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
+
+  for i in ${MAC0} ${MAC1} ${MAC2} ${MAC3} ${MAC4}
+  do 
+    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
+    if [ $? -ne 0 ];then
+      echo "MAC ${i} is not in table!"
+      FAIL_FLAG=1
+      break
+    fi
+  done
+
+  if [ ${FAIL_FLAG} -eq 1 ];then
+      bring_down_pfvf
+      continue
+  fi
+
+  echo "PF/VF setup successful."
+  exit 0
+done
diff --git a/roles/tsg-env-mcn/files/env-mcn2/switch_control_client_non_block b/roles/tsg-env-mcn/files/env-mcn2/switch_control_client_non_block
new file mode 100644
index 0000000..5cdba48
Binary files /dev/null and b/roles/tsg-env-mcn/files/env-mcn2/switch_control_client_non_block differ
diff --git a/roles/tsg-env-mcn/files/env-mcn2/tsg-env.service b/roles/tsg-env-mcn/files/env-mcn2/tsg-env.service
new file mode 100644
index 0000000..7ff9bc1
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn2/tsg-env.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=tsg sled-mcn3 env init
+Requires=network.target
+After=network.target
+Before=tfe-env.service mrenv.service
+
+[Service]
+ExecStart=/opt/tsg/env/setup
+ExecStop=/opt/tsg/env/tsg-env_stop
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+RequiredBy=tfe-env.service mrenv.service
diff --git a/roles/tsg-env-mcn/files/env-mcn2/tsg-env_stop b/roles/tsg-env-mcn/files/env-mcn2/tsg-env_stop
new file mode 100644
index 0000000..c5ce519
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn2/tsg-env_stop
@@ -0,0 +1,6 @@
+#!/bin/bash
+#
+echo 0 >/sys/class/net/ens8/device/sriov_numvfs
+ifconfig ens8.100 down
+vconfig rem ens8.100
+ifconfig ens8 down
diff --git a/roles/tsg-env-mcn/files/env-mcn3/setup b/roles/tsg-env-mcn/files/env-mcn3/setup
new file mode 100644
index 0000000..fd4845d
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn3/setup
@@ -0,0 +1,115 @@
+#!/bin/bash
+# set -x
+
+CURRENT_PATH=`dirname $0`
+TP_SVR=192.168.100.5
+TP_PORT=10000
+REMOTE_CONTROL_BIN=switch_control_client_non_block
+modprobe 8021q
+
+function get_netdev_by_pci()
+{
+  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
+  for i in ${DEV_LIST}
+  do
+    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
+    if [ $? -eq 0 ];then
+      TARGET=${i}
+      break
+    fi
+  done
+
+  echo ${TARGET}
+}
+
+function pf_setup()
+{
+  ifconfig ens8 up
+  vconfig add ens8 100
+  vconfig set_flag ens8.100 1 1
+  ifconfig ens8.100 192.168.100.4 netmask 255.255.255.0 up
+  sleep 1
+}
+
+function vf_setup()
+{
+  echo 4 > /sys/class/net/ens8/device/sriov_numvfs
+  sleep 5
+
+  ifconfig ens8f3 up
+  ip link set ens8 vf 2 vlan 200
+  ifconfig ens8f3 192.168.200.4 netmask 255.255.255.0
+
+  ifconfig ens8f1 up
+  ifconfig ens8f2 up
+  ifconfig ens8f3 up
+  ifconfig ens8f4 up
+  sleep 5
+}
+
+function bring_down_pfvf()
+{
+  echo 0 > /sys/class/net/ens8/device/sriov_numvfs
+  ifconfig ens8 down
+  sleep 3
+}
+
+# Main loop
+while :
+do
+  FAIL_FLAG=0
+
+  # Make sure PF is valid
+  ping ${TP_SVR} -c 1 
+  if [ $? -ne 0 ];then
+    echo "Please make sure switch board is up."
+    bring_down_pfvf
+    pf_setup
+    continue
+  fi
+
+  # Make sure TestPoint is up.
+  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
+  if [ $? -ne 0 ];then
+    echo "Cannot reach TestPoint!"
+    echo "Please make sure TestPoint is up and in remote-listen mode."
+    sleep 5
+    continue
+  fi
+
+  # Create VFs and get MAC addresses
+  vf_setup
+
+  PF=`get_netdev_by_pci 85:00.0`
+  VF1=`get_netdev_by_pci 85:00.1`
+  VF2=`get_netdev_by_pci 85:00.2`
+  VF3=`get_netdev_by_pci 85:00.3`
+  VF4=`get_netdev_by_pci 85:00.4`
+
+  MAC0=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
+  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
+  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
+  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
+  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
+
+  # Make sure VFs are valid
+  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
+
+  for i in ${MAC0} ${MAC1} ${MAC2} ${MAC3} ${MAC4}
+  do 
+    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
+    if [ $? -ne 0 ];then
+      echo "MAC ${i} is not in table!"
+      FAIL_FLAG=1
+      break
+    fi
+  done
+
+  if [ ${FAIL_FLAG} -eq 1 ];then
+      bring_down_pfvf
+      continue
+  fi
+
+  echo "PF/VF setup successful."
+  exit 0
+done
diff --git a/roles/tsg-env-mcn/files/env-mcn3/switch_control_client_non_block b/roles/tsg-env-mcn/files/env-mcn3/switch_control_client_non_block
new file mode 100644
index 0000000..5cdba48
Binary files /dev/null and b/roles/tsg-env-mcn/files/env-mcn3/switch_control_client_non_block differ
diff --git a/roles/tsg-env-mcn/files/env-mcn3/tsg-env.service b/roles/tsg-env-mcn/files/env-mcn3/tsg-env.service
new file mode 100644
index 0000000..7ff9bc1
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn3/tsg-env.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=tsg sled-mcn3 env init
+Requires=network.target
+After=network.target
+Before=tfe-env.service mrenv.service
+
+[Service]
+ExecStart=/opt/tsg/env/setup
+ExecStop=/opt/tsg/env/tsg-env_stop
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
+RequiredBy=tfe-env.service mrenv.service
diff --git a/roles/tsg-env-mcn/files/env-mcn3/tsg-env_stop b/roles/tsg-env-mcn/files/env-mcn3/tsg-env_stop
new file mode 100644
index 0000000..c5ce519
--- /dev/null
+++ b/roles/tsg-env-mcn/files/env-mcn3/tsg-env_stop
@@ -0,0 +1,6 @@
+#!/bin/bash
+#
+echo 0 >/sys/class/net/ens8/device/sriov_numvfs
+ifconfig ens8.100 down
+vconfig rem ens8.100
+ifconfig ens8 down
diff --git a/roles/tsg-env-mcn/tasks/main.yml b/roles/tsg-env-mcn/tasks/main.yml
new file mode 100644
index 0000000..b4428d6
--- /dev/null
+++ b/roles/tsg-env-mcn/tasks/main.yml
@@ -0,0 +1,57 @@
+---
+- name: "copy setup script"
+  copy:
+    src: "{{ role_path }}/files/{{item.dict}}/setup"
+    dest: "/opt/tsg/env/"   
+    mode: 0755    
+  when: item.group_name in group_names
+  with_items:
+   - { group_name: 'blade-00', dict: 'env-mcn0' }
+   - { group_name: 'blade-01', dict: 'env-mcn1' }
+   - { group_name: 'blade-02', dict: 'env-mcn2' }
+   - { group_name: 'blade-03', dict: 'env-mcn3' }
+
+
+- name: "copy switch_control_client_non_block"
+  copy:
+    src: "{{ role_path }}/files/{{item.dict}}/switch_control_client_non_block"
+    dest: "/opt/tsg/env/"   
+    mode: 0755   
+  when: item.group_name in group_names
+  with_items:
+   - { group_name: 'blade-00', dict: 'env-mcn0' }
+   - { group_name: 'blade-01', dict: 'env-mcn1' }
+   - { group_name: 'blade-02', dict: 'env-mcn2' }
+   - { group_name: 'blade-03', dict: 'env-mcn3' }
+
+
+- name: "copy tsg-env.service"
+  copy:
+    src: "{{ role_path }}/files/{{item.dict}}/tsg-env.service"
+    dest: "/usr/lib/systemd/system/"   
+    mode: 0644  
+  when: item.group_name in group_names
+  with_items:
+   - { group_name: 'blade-00', dict: 'env-mcn0' }
+   - { group_name: 'blade-01', dict: 'env-mcn1' }
+   - { group_name: 'blade-02', dict: 'env-mcn2' }
+   - { group_name: 'blade-03', dict: 'env-mcn3' }
+
+- name: "copy tsg-env_stop"
+  copy:
+    src: "{{ role_path }}/files/{{item.dict}}/tsg-env_stop"
+    dest: "/opt/tsg/env/"   
+    mode: 0755 
+  when: item.group_name in group_names
+  with_items:
+   - { group_name: 'blade-00', dict: 'env-mcn0' }
+   - { group_name: 'blade-01', dict: 'env-mcn1' }
+   - { group_name: 'blade-02', dict: 'env-mcn2' }
+   - { group_name: 'blade-03', dict: 'env-mcn3' } 
+
+
+- name: "enable tsg-env"
+  systemd:
+    name: tsg-env
+    enabled: yes
+    daemon_reload: yes