同步Astana客户验证环境配置

clear_redis_cache.yml

@@ -0,0 +1,8 @@
+- hosts: blade-00
+  tasks:
+  - name: "killall certstore"
+    command: "killall certstore"
+  - name: "clear redis cache"
+    command: "redis-cli flushdb"
+  - name: "killall sapp"
+    command: "killall sapp"

hosts.astana

@@ -37,5 +37,22 @@ ansible_user=root
 10.4.39.32
 10.4.39.36
 
+[astana-adc-3]
+10.4.39.9
+10.4.39.10
+10.4.39.11
+10.4.39.12
+
+[astana-adc-9]
+10.4.39.33
+10.4.39.34
+10.4.39.35
+10.4.39.36
+
+[control-blade-all:children]
+blade-01
+blade-02
+blade-03
+
 [certstore]
 10.4.35.1 ansible_user=tsg

remove_ansible_block.yml

@@ -0,0 +1,6 @@
+- hosts: all
+  tasks:
+  - name: "remove all ansible manange block"
+    blockinfile:
+       dest: "/etc/rc.d/rc.local"
+       state: absent 

roles/certstore/tasks/main.yml

@@ -0,0 +1,22 @@
+---
+- name: Ensures /home/tsg exists
+  file: path=/home/tsg state=directory 
+  tags: mkdir
+  
+- name: install certstore
+  unarchive:
+    src: "{{ role_path }}/files/certstore-base-online-20190701.tar.gz"
+    dest: /home/tsg
+
+- name: template certstore configure file
+  template:
+    src: "{{ role_path }}/templates/cert_store.ini.j2"
+    dest: /home/tsg/certstore-base/conf/cert_store.ini
+
+- name: bootup certstore
+  blockinfile:
+    marker: "## {mark} bootstrap certstore"
+    path: /etc/rc.d/rc.local
+    block: |
+        cd /home/tsg/certstore-base; ./r2_certstore
+

roles/certstore/templates/cert_store.ini.j2

@@ -0,0 +1,44 @@
+[SYSTEM]
+#1:print on screen, 0:don't
+DEBUG_SWITCH = 1
+#10:DEBUG, 20:INFO, 30:FATAL
+RUN_LOG_LEVEL = 30
+RUN_LOG_PATH = ./logs
+[CONFIG]
+#Number of running threads
+thread-nu = 4
+#Local default root certificate is valid for 30 days by default
+expire_after = 30
+#Local default root certificate path
+local_debug = 1
+ca_path = ./cert/tango-ca-v3-trust-ca.pem
+untrusted_ca_path = ./cert/mesalab-ca-untrust.pem
+[NTC_MAAT]
+#Configure the load mode,
+#0: using the configuration distribution network
+#1: using local json
+#2: using Redis reads
+maat_json_switch=2
+#When the loading mode is sent to the network, set the scanning configuration modification interval (s).
+effective_interval=1
+#Specify the location of the configuration library table file
+table_info=./conf/table_info.conf
+#Incremental profile path
+inc_cfg_dir=./rule/inc/index
+#Full profile path
+full_cfg_dir=./rule/full/index
+#Json file path when json schema is used
+pxy_obj_keyring=./conf/pxy_obj_keyring.json
+[LIBEVENT]
+#Local monitor port number, default is 9991
+port = 9991
+[CERTSTORE_REDIS]
+#The Redis server IP address and port number where the certificate is stored locally
+ip = 127.0.0.1
+port = 6379
+[MAAT_REDIS]
+#Maat monitors the Redsi server IP address and port number
+ip = 10.4.35.1
+port = 6379
+dbindex = 0
+

roles/framework/files/framework/framework.conf

@@ -0,0 +1 @@
+/opt/MESA/lib/

roles/framework/tasks/main.yml

@@ -13,6 +13,11 @@
       - /tmp/ansible_deploy/dkms/dkms-2.7.1-1.el7.noarch.rpm
       - /tmp/ansible_deploy/framework/framework-2.0.9.f583d06-1.el7.centos.x86_64.rpm
 
+- name: "install framework ld.conf"
+  synchronize:
+    src: "{{ role_path }}/files/framework/framework.conf"
+    dest: /etc/ld.so.conf.d/framework.conf
+
 - name: "install/update rulescan header files"
   synchronize:
     src: "{{ role_path }}/files/rulescan/rulescan.h"

roles/kni/tasks/main.yml

@@ -5,7 +5,7 @@
   
 - name: Extract kni.tar.gz
   unarchive:
-    src: "{{ role_path }}/files/kni_20190630.tar.gz"
+    src: "{{ role_path }}/files/kni_20190703.tar.gz"
     dest: /home/tsg
   tags: extract
 
@@ -15,9 +15,16 @@
     dest: /home/tsg/kni/conf/kni/kni.conf
   tags: template
 
+- name: Template the main.conf
+  template:
+    src: "{{ role_path }}/templates/main.conf.j2"
+    dest: /home/tsg/kni/conf/main.conf
+  tags: template
+
 - name: bootup sapp
   blockinfile:
     path: /etc/rc.d/rc.local
+    marker: "## {mark} bootstrap mrzcpd and kni"
     block: |
         systemctl start mrzcpd
         systemctl start mrtunnat

roles/kni/templates/kni.conf.j2

@@ -67,7 +67,7 @@ mho_screen_print_ctrl = 0
 mho_thread_safe = 1
 mho_mutex_num = 160
 mho_hash_slot_size = 160000
-mho_hash_max_element_num = 640000
+mho_hash_max_element_num = 1280000
 mho_expire_time = 30
 mho_eliminate_type = LRU
 
@@ -76,10 +76,10 @@ mho_screen_print_ctrl = 0
 mho_thread_safe = 1
 mho_mutex_num = 160
 mho_hash_slot_size = 160000
-mho_hash_max_element_num = 640000
+mho_hash_max_element_num = 1280000
 #must be 0
 mho_expire_time = 0
 mho_eliminate_type = LRU
 
 [field_stat]
-stat_path = ./fs2_kni.status
+stat_path = ./fs2_kni.status

roles/kni/templates/main.conf.j2

@@ -0,0 +1,93 @@
+[Module]
+threadnum=16
+cpu_bind_core_mask=0x1fffe
+app_instance_name=sapp_master
+MaxTcpStreams=200000
+MaxUdpStreams=200000
+LinkTimeout=30
+UdpResetTime=0
+CreatLinkMode=1
+MaxUnorderNum=5
+TcpAllEnable=1
+IPv6_module_enable=1
+IPv6_raw_socket=1
+ipentry_priority_over_ipfrag=0
+dictator_switch=0
+load_plug_switch=1
+discard_ack=0
+kill_tcp_remedy=0
+
+signal_take_over_switch=0
+
+timestamp_record=0
+#timedelay_threshold unit: CPU CYCLE
+timedelay_threshold=99900000
+
+analyse_tcp_option=1
+
+#in linux kernel 2.6.20 and subsequent version, should enable this
+use_MESAsleep=0
+
+#skip ethernet, if you don't care MAC address
+skip_ethernet_layer=0
+
+#for dual-stack send rst 
+skip_not_ip_layer=0
+
+#packet use DDP protocol
+encapsulate_with_ddp=0
+
+maxrandval=65535
+randkeyval=13
+
+#(0:pag,1:pcap,2:dumpfile,3:pfring,4:DPDK,5:ppf,6:NPacket,7:qnf,8:N95,9:pcap-dumpfile-list,10:topsec,
+#(11:ipfile, 12:marsio4, 13:agent_smith, 14:dpdk_vxlan, 15:marsio_vxlan, 16:pag_marsio
+capdatamodlel=12
+forwardpkt=0
+pcapdevice=vxlan_user
+#pcapdevice=lo
+pcapdevice2=
+pcapfilter=
+pcap_dumpfile_list=dumpfile.list
+senddevice=lo
+gateway_mac=00:90:0b:1b:a1:2b
+
+
+#max pending packet num between capture-thread and handle-thread
+queue_max_num=2000
+
+#-----network connection mode definition-----
+#	0: don't send packet, only capture;
+#	1: parallel mode with single card; 
+#	2: serial mode with two card;	
+#	3: logic serial mode with G device.	
+net_connection_mode=3
+
+
+[ShowStatInfo]
+showinterval=3
+iknow_listen_port=65500
+platform_log_level=20
+FS_switch=1
+FS_print_switch=1
+FS_server_ip=127.0.0.1
+FS_server_port=8126
+FS_cycle=10
+
+[pkt_dump]
+pkt_dump_switch=0
+#1:local file; 2:udp socket
+pkt_dump_mode=2
+pkt_dump_cmd_port=12345
+pkt_dump_bpf_filter=
+pkt_dump_file_root_dir=/dev/shm/pkt_dump234
+
+#config 'pkt_dump_total_size' means summation of all files size in 'root_dir', unit:MB.
+pkt_dump_total_size=29900
+
+#config 'pkt_dump_file_max_size' means MB per thread.
+pkt_dump_file_max_size=10000
+
+#config 'pkt_dump_thread_seq' means which thread enable this module, 'all' is total running thread.
+pkt_dump_thread_seq=all
+#pkt_dump_thread_seq=0,1,2,3

roles/mrzcpd/tasks/main.yml

@@ -10,7 +10,7 @@
     state: present
   vars:
     packages:
-    - /tmp/ansible_deploy/mrzcpd-4.3.10.497aaf5-1.el7.x86_64.rpm
+    - /tmp/ansible_deploy/mrzcpd-4.3.12.6ee1589-1.el7.x86_64.rpm
 
 - name: "update sysconfig/mrzcpd"
   template:
@@ -33,4 +33,4 @@
   template:
     src: "{{ role_path }}/templates/mrtunnat.conf.inline.j2"
     dest: /opt/mrzcpd/etc/mrtunnat.conf
-  when: nic_traffic_mirror is not defined
+  when: nic_traffic_mirror is not defined

roles/mrzcpd/templates/mrglobal.conf.inline.j2

@@ -17,7 +17,7 @@ jumbo_frame=1
 max_rx_pkt_len=15360
 clear_tx_flags=1
 vlan-filter=1
-vlan-id-allow=3811,3812,3821,3822
+vlan-id-allow=1301,1302,2301,2302,1501,1502,2501,2502,1601,1602,2601,2602,1701,1702,2701,2702,1801,1802,2801,2802,1901,1902,2901,2902
 vlan-pvid=0
 vlan-pvid-mode=0
 
@@ -42,7 +42,7 @@ promisc=1
 [service]
 # lcore id for i/o service, use comma to split
 iocore=53,54
-distmode=3
+distmode=2
 hashmode=0
 
 [eal]

roles/mrzcpd/templates/mrtunnat.conf.inline.j2

@@ -3,14 +3,36 @@ lcore_id=49,50,51,52
 appsym=tunnat
 phydev={{nic_data_incoming.name}}
 virtdev=vxlan_fwd
-nr_max_sessions=131070
+nr_max_sessions=524280
-expire_time=180
+nr_slots=1048576
+expire_time=60
 reverse_tunnel=0
 use_recent_tunnel=0
+use_tuple4_as_sskey=1
 
 [vlan_flipping]
 enable=1
-c_router_vlan_id_0=3811
+c_router_vlan_id_0=1301
-i_router_vlan_id_0=3812
+i_router_vlan_id_0=1302
-c_router_vlan_id_1=3821
+c_router_vlan_id_1=2301
-i_router_vlan_id_1=3822
+i_router_vlan_id_1=2302
+c_router_vlan_id_2=1501
+i_router_vlan_id_2=1502
+c_router_vlan_id_3=2501
+i_router_vlan_id_3=2502
+c_router_vlan_id_4=1601
+i_router_vlan_id_4=1602
+c_router_vlan_id_5=2601
+i_router_vlan_id_5=2602
+c_router_vlan_id_6=1701
+i_router_vlan_id_6=1702
+c_router_vlan_id_7=2701
+i_router_vlan_id_7=2702
+c_router_vlan_id_8=1801
+i_router_vlan_id_8=1802
+c_router_vlan_id_9=2801
+i_router_vlan_id_9=2802
+c_router_vlan_id_10=1901
+i_router_vlan_id_10=1902
+c_router_vlan_id_11=2901
+i_router_vlan_id_11=2902

roles/tfe/tasks/main.yml

@@ -8,10 +8,24 @@
   yum:
     name: "{{ packages }}"
     state: present
+    allow_downgrade: yes
   vars:
     packages:
       - /tmp/ansible_deploy/tfe-4.0.5.348afbc-1.el7.x86_64.rpm
-      - /tmp/ansible_deploy/tfe-kmod-6ed8c79-1dkms.noarch.rpm
+
+- name: "hotfix tfe program"
+  synchronize:
+    src: "{{ role_path }}/files/tfe"
+    dest: /home/tsg/tfe/bin/tfe
+
+#- name: "remove the old tfe-kmod"
+#  command: rpm -e tfe-kmod
+
+#- name: "delete the tfe_kmod.ko"
+#  command: rm -f /lib/modules/5.1.8-1.el7.elrepo.x86_64/extra/tfe_kmod.ko
+
+#- name: "reinstall the tfe-kmod"
+#  command: rpm -i /tmp/ansible_deploy/tfe-kmod-c498d30-1dkms.noarch.rpm --force
 
 - name: "template tfe-env config"
   template:
@@ -28,6 +42,11 @@
     src: "{{ role_path }}/templates/pangu_pxy.conf.j2"
     dest: /home/tsg/tfe/conf/pangu/pangu_pxy.conf
 
+- name: "deploy qaznet cert"
+  copy:
+    src: "{{ role_path }}/files/qaznet_intermedia.pem"
+    dest: "/home/tsg/tfe/resource/tfe/qaznet_intermedia.pem"
+
 - name: "start tfe-kmod"
   modprobe:
     name: tfe_kmod
@@ -48,6 +67,7 @@
 - name: "bootup tfe"
   blockinfile:
     path: /etc/rc.d/rc.local
+    marker: "## {mark} bootstrap tfe"
     block: |
         systemctl start tfe-env
         cd /home/tsg/tfe; ./r2_tfe

roles/tfe/templates/pangu_pxy.conf.j2

@@ -1,5 +1,5 @@
 [debug]
-log_level=10
+log_level=30
 
 [log]
 nic_name= {{ nic_mgr.name }}

roles/tfe/templates/tfe.conf.j2

@@ -29,7 +29,7 @@ mode= {{ tfe.keykeeper.mode }}
 no_cache=0
 cert_store_host= {{ cert_store_server.address }}
 cert_store_port= {{ cert_store_server.port }}
-ca_path=resource/tfe/tango-ca-v3-trust-ca.pem
+ca_path=resource/tfe/qaznet_intermedia.pem
 untrusted_ca_path=resource/tfe/tango-ca-v3-untrust-ca.pem
 
 [debug]
@@ -54,11 +54,11 @@ tcp_ttl_upstream=75
 tcp_ttl_downstream=70
 
 [log]
-level=10
+level=30
 
 [stat]
 statsd_server=192.168.10.72
 statsd_port=8126
 
 [http]
-loglevel=20
+loglevel=30

site.yml

@@ -4,6 +4,7 @@
     - framework
     - mrzcpd
     - kni
+    - certstore
   vars_files:
     - "vars/common.yml"
     - "vars/kni.yml"
@@ -59,9 +60,3 @@
   - nic_traffic_mirror:
       name: ens8f2
       use_mrzcpd: 1
-
-- hosts: certstore
-  roles:
-    - framework
-  become: yes
-  become_user: root

tfe_clean_core_and_logs.yml

@@ -0,0 +1,21 @@
+- hosts: control-blade-all
+  tasks:
+  - name: "killall tfe"
+    command: "killall tfe"
+
+  - name: "find corefiles to delete"
+    find:
+      paths: /home/tsg/tfe/
+      patterns: core.*
+    register: corefiles_to_delete
+
+  - name: "cleanup coredump"
+    file:
+      state: absent
+      path: '{{ item.path }}'
+    with_items: "{{ corefiles_to_delete.files }}"
+  
+  - name: "cleanup RESTART.log"
+    file:
+      state: absent
+      path: /home/tsg/tfe/RESTART.log

vars/common.yml

@@ -3,7 +3,7 @@
     port: 6379
     db: 0
 - cert_store_server:
-    address: 10.4.35.1
+    address: 192.168.100.1
     port: 9991
 - log_kafkabrokers:
     address: "10.4.37.7:9092,10.4.35.8:9092,10.4.35.9:9092"

vars/kni.yml

@@ -2,8 +2,8 @@
     global:
         log_level: 30
         tfe_node_count: 3
-        tfe_data_recv_thread_num: 3
+        tfe_data_recv_thread_num: 6
-        keepalive_replay_switch: 1 
+        keepalive_replay_switch: 1
     watch_dog: 
         switch: 1 
     maat:
@@ -17,4 +17,4 @@
       - tfe1:
           enabled: 1
       - tfe2:
-          enabled: 1
+          enabled: 1

vars/tfe.yml

@@ -1,5 +1,5 @@
 - tfe:
-    nr_threads: 16
+    nr_threads: 32
     keykeeper:
-        mode: "normal"
+        mode: "debug"
-        no_cache : 0
+        no_cache : 0