删除tsg-env-mcn0,1,2,3

roles/tsg-env-mcn0/files/setup

@@ -1,132 +0,0 @@
-#!/bin/bash
-# set -x
-
-CURRENT_PATH=`dirname $0`
-TP_SVR=192.168.100.5
-TP_PORT=10000
-REMOTE_CONTROL_BIN=switch_control_client_non_block
-
-function get_netdev_by_pci()
-{
-  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
-  for i in ${DEV_LIST}
-  do
-    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
-    if [ $? -eq 0 ];then
-      TARGET=${i}
-      break
-    fi
-  done
-
-  echo ${TARGET}
-}
-
-function pf_setup()
-{
-  ifconfig ens1 up
-
-  modprobe 8021q
-  vconfig add ens1 100
-  vconfig set_flag ens1.100 1 1
-  ifconfig ens1.100 192.168.100.1 netmask 255.255.255.0 up
-  sleep 1
-}
-
-function vf_setup()
-{
-  echo 8 > /sys/class/net/ens1/device/sriov_numvfs
-  sleep 5
-
-  ifconfig ens1f3 up
-  ip link set ens1 vf 2 vlan 200
-  ifconfig ens1f3 192.168.200.1 netmask 255.255.255.0
-
-  ifconfig ens1f1 up
-  ifconfig ens1f2 up
-  ifconfig ens1f3 up
-  ifconfig ens1f4 up
-  ifconfig ens1f5 up
-  ifconfig ens1f6 up
-  ifconfig ens1f7 up
-  ifconfig enp1s1 up
-
-  sleep 5
-}
-
-function bring_down_pfvf()
-{
-  echo 0 > /sys/class/net/ens1/device/sriov_numvfs
-  ifconfig ens1 down
-  sleep 3
-}
-
-
-# Main loop
-while :
-do
-  FAIL_FLAG=0
-
-  # Make sure PF is valid
-  ping ${TP_SVR} -c 1 
-  if [ $? -ne 0 ];then
-    echo "Please make sure switch board is up."
-    bring_down_pfvf
-    pf_setup
-    continue
-  fi
-
-  # Make sure TestPoint is up.
-  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
-  if [ $? -ne 0 ];then
-    echo "Cannot reach TestPoint!"
-    echo "Please make sure TestPoint is up and in remote-listen mode."
-    sleep 5
-    continue
-  fi
-
-  # Create VFs and get MAC addresses
-  vf_setup
-
-  PF=`get_netdev_by_pci 01:00.0`
-  VF1=`get_netdev_by_pci 01:00.1`
-  VF2=`get_netdev_by_pci 01:00.2`
-  VF3=`get_netdev_by_pci 01:00.3`
-  VF4=`get_netdev_by_pci 01:00.4`
-  VF5=`get_netdev_by_pci 01:00.5`
-  VF6=`get_netdev_by_pci 01:00.6`
-  VF7=`get_netdev_by_pci 01:00.7`
-  VF8=`get_netdev_by_pci 01:01.0`
-
-  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
-  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
-  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
-  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
-  MAC5=`ifconfig ${VF5} |grep ether |awk -F' ' '{print $2}'`
-  MAC6=`ifconfig ${VF6} |grep ether |awk -F' ' '{print $2}'`
-  MAC7=`ifconfig ${VF7} |grep ether |awk -F' ' '{print $2}'`
-  MAC8=`ifconfig ${VF8} |grep ether |awk -F' ' '{print $2}'`
-  MAC9=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
-
-  # Make sure VFs are valid
-  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
-
-  for i in ${MAC1} ${MAC2} ${MAC3} ${MAC4} ${MAC5} ${MAC6} ${MAC7} ${MAC8} ${MAC9}
-  do 
-    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
-    if [ $? -ne 0 ];then
-      echo "MAC ${i} is not in table!"
-      FAIL_FLAG=1
-      break
-    fi
-  done
-
-  if [ ${FAIL_FLAG} -eq 1 ];then
-      bring_down_pfvf
-      continue
-  fi
-
-  echo "PF/VF setup successful."
-  exit 0
-done
-
-

roles/tsg-env-mcn0/files/tsg-env.service

@@ -1,15 +0,0 @@
-[Unit]
-Description=tsg sled-mcn0 env init
-Requires=network.target
-After=network.target
-Before=mrenv.service
-
-[Service]
-ExecStart=/opt/tsg/env/setup
-ExecStop=/opt/tsg/env/tsg-env_stop
-Type=oneshot
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
-RequiredBy=mrenv.service

roles/tsg-env-mcn0/files/tsg-env_stop

@@ -1,6 +0,0 @@
-#!/bin/bash
-#
-echo 0 >/sys/class/net/ens1/device/sriov_numvfs
-ifconfig ens1.100 down
-vconfig rem ens1.100
-ifconfig ens1 down

roles/tsg-env-mcn0/tasks/main.yml

@@ -1,31 +0,0 @@
----
-- name: "copy setup script"
-  copy:
-    src: "{{ role_path }}/files/setup"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-
-- name: "copy switch_control_client_non_block"
-  copy:
-    src: "{{ role_path }}/files/switch_control_client_non_block"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-    
-- name: "copy tsg-env.service"
-  copy:
-    src: "{{ role_path }}/files/tsg-env.service"
-    dest: "/usr/lib/systemd/system/"   
-    mode: 0644  
-
-- name: "copy tsg-env_stop"
-  copy:
-    src: "{{ role_path }}/files/tsg-env_stop"
-    dest: "/opt/tsg/env/"   
-    mode: 0755 
-    
-- name: "enable tsg-env"
-  systemd:
-    name: tsg-env
-    enabled: yes
-    daemon_reload: yes
-

roles/tsg-env-mcn1/files/setup

@@ -1,115 +0,0 @@
-#!/bin/bash
-# set -x
-
-CURRENT_PATH=`dirname $0`
-TP_SVR=192.168.100.5
-TP_PORT=10000
-REMOTE_CONTROL_BIN=switch_control_client_non_block
-modprobe 8021q
-
-function get_netdev_by_pci()
-{
-  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
-  for i in ${DEV_LIST}
-  do
-    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
-    if [ $? -eq 0 ];then
-      TARGET=${i}
-      break
-    fi
-  done
-
-  echo ${TARGET}
-}
-
-function pf_setup()
-{
-  ifconfig ens1 up
-  vconfig add ens1 100
-  vconfig set_flag ens1.100 1 1
-  ifconfig ens1.100 192.168.100.2 netmask 255.255.255.0 up
-  sleep 1
-}
-
-function vf_setup()
-{
-  echo 4 > /sys/class/net/ens1/device/sriov_numvfs
-  sleep 5
-
-  ifconfig ens1f3 up
-  ip link set ens1 vf 2 vlan 200
-  ifconfig ens1f3 192.168.200.2 netmask 255.255.255.0
-
-  ifconfig ens1f1 up
-  ifconfig ens1f2 up
-  ifconfig ens1f3 up
-  ifconfig ens1f4 up
-  sleep 5
-}
-
-function bring_down_pfvf()
-{
-  echo 0 > /sys/class/net/ens1/device/sriov_numvfs
-  ifconfig ens1 down
-  sleep 3
-}
-
-# Main loop
-while :
-do
-  FAIL_FLAG=0
-
-  # Make sure PF is valid
-  ping ${TP_SVR} -c 1 
-  if [ $? -ne 0 ];then
-    echo "Please make sure switch board is up."
-    bring_down_pfvf
-    pf_setup
-    continue
-  fi
-
-  # Make sure TestPoint is up.
-  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
-  if [ $? -ne 0 ];then
-    echo "Cannot reach TestPoint!"
-    echo "Please make sure TestPoint is up and in remote-listen mode."
-    sleep 5
-    continue
-  fi
-
-  # Create VFs and get MAC addresses
-  vf_setup
-
-  PF=`get_netdev_by_pci 01:00.0`
-  VF1=`get_netdev_by_pci 01:00.1`
-  VF2=`get_netdev_by_pci 01:00.2`
-  VF3=`get_netdev_by_pci 01:00.3`
-  VF4=`get_netdev_by_pci 01:00.4`
-
-  MAC0=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
-  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
-  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
-  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
-  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
-
-  # Make sure VFs are valid
-  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
-
-  for i in ${MAC0} ${MAC1} ${MAC2} ${MAC3} ${MAC4}
-  do 
-    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
-    if [ $? -ne 0 ];then
-      echo "MAC ${i} is not in table!"
-      FAIL_FLAG=1
-      break
-    fi
-  done
-
-  if [ ${FAIL_FLAG} -eq 1 ];then
-      bring_down_pfvf
-      continue
-  fi
-
-  echo "PF/VF setup successful."
-  exit 0
-done

roles/tsg-env-mcn1/files/tsg-env.service

@@ -1,15 +0,0 @@
-[Unit]
-Description=tsg sled-mcn1 env init
-Requires=network.target
-After=network.target
-Before=tfe-env.service mrenv.service
-
-[Service]
-ExecStart=/opt/tsg/env/setup
-ExecStop=/opt/tsg/env/tsg-env_stop
-Type=oneshot
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
-RequiredBy=tfe-env.service mrenv.service

roles/tsg-env-mcn1/files/tsg-env_stop

@@ -1,6 +0,0 @@
-#!/bin/bash
-#
-echo 0 >/sys/class/net/ens1/device/sriov_numvfs
-ifconfig ens1.100 down
-vconfig rem ens1.100
-ifconfig ens1 down

roles/tsg-env-mcn1/tasks/main.yml

@@ -1,30 +0,0 @@
----
-- name: "copy setup script"
-  copy:
-    src: "{{ role_path }}/files/setup"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-
-- name: "copy switch_control_client_non_block"
-  copy:
-    src: "{{ role_path }}/files/switch_control_client_non_block"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-    
-- name: "copy tsg-env.service"
-  copy:
-    src: "{{ role_path }}/files/tsg-env.service"
-    dest: "/usr/lib/systemd/system/"   
-    mode: 0644
-    
-- name: "copy tsg-env_stop"
-  copy:
-    src: "{{ role_path }}/files/tsg-env_stop"
-    dest: "/opt/tsg/env/"   
-    mode: 0755
-
-- name: "enable tsg-env"
-  systemd:
-    name: tsg-env
-    enabled: yes
-    daemon_reload: yes

roles/tsg-env-mcn2/files/setup

@@ -1,115 +0,0 @@
-#!/bin/bash
-# set -x
-
-CURRENT_PATH=`dirname $0`
-TP_SVR=192.168.100.5
-TP_PORT=10000
-REMOTE_CONTROL_BIN=switch_control_client_non_block
-modprobe 8021q
-
-function get_netdev_by_pci()
-{
-  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
-  for i in ${DEV_LIST}
-  do
-    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
-    if [ $? -eq 0 ];then
-      TARGET=${i}
-      break
-    fi
-  done
-
-  echo ${TARGET}
-}
-
-function pf_setup()
-{
-  ifconfig ens8 up
-  vconfig add ens8 100
-  vconfig set_flag ens8.100 1 1
-  ifconfig ens8.100 192.168.100.3 netmask 255.255.255.0 up
-  sleep 1
-}
-
-function vf_setup()
-{
-  echo 4 > /sys/class/net/ens8/device/sriov_numvfs
-  sleep 5
-
-  ifconfig ens8f3 up
-  ip link set ens8 vf 2 vlan 200
-  ifconfig ens8f3 192.168.200.3 netmask 255.255.255.0
-
-  ifconfig ens8f1 up
-  ifconfig ens8f2 up
-  ifconfig ens8f3 up
-  ifconfig ens8f4 up
-  sleep 5
-}
-
-function bring_down_pfvf()
-{
-  echo 0 > /sys/class/net/ens8/device/sriov_numvfs
-  ifconfig ens8 down
-  sleep 3
-}
-
-# Main loop
-while :
-do
-  FAIL_FLAG=0
-
-  # Make sure PF is valid
-  ping ${TP_SVR} -c 1 
-  if [ $? -ne 0 ];then
-    echo "Please make sure switch board is up."
-    bring_down_pfvf
-    pf_setup
-    continue
-  fi
-
-  # Make sure TestPoint is up.
-  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
-  if [ $? -ne 0 ];then
-    echo "Cannot reach TestPoint!"
-    echo "Please make sure TestPoint is up and in remote-listen mode."
-    sleep 5
-    continue
-  fi
-
-  # Create VFs and get MAC addresses
-  vf_setup
-
-  PF=`get_netdev_by_pci 85:00.0`
-  VF1=`get_netdev_by_pci 85:00.1`
-  VF2=`get_netdev_by_pci 85:00.2`
-  VF3=`get_netdev_by_pci 85:00.3`
-  VF4=`get_netdev_by_pci 85:00.4`
-
-  MAC0=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
-  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
-  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
-  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
-  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
-
-  # Make sure VFs are valid
-  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
-
-  for i in ${MAC0} ${MAC1} ${MAC2} ${MAC3} ${MAC4}
-  do 
-    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
-    if [ $? -ne 0 ];then
-      echo "MAC ${i} is not in table!"
-      FAIL_FLAG=1
-      break
-    fi
-  done
-
-  if [ ${FAIL_FLAG} -eq 1 ];then
-      bring_down_pfvf
-      continue
-  fi
-
-  echo "PF/VF setup successful."
-  exit 0
-done

roles/tsg-env-mcn2/files/tsg-env.service

@@ -1,15 +0,0 @@
-[Unit]
-Description=tsg sled-mcn3 env init
-Requires=network.target
-After=network.target
-Before=tfe-env.service mrenv.service
-
-[Service]
-ExecStart=/opt/tsg/env/setup
-ExecStop=/opt/tsg/env/tsg-env_stop
-Type=oneshot
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
-RequiredBy=tfe-env.service mrenv.service

roles/tsg-env-mcn2/files/tsg-env_stop

@@ -1,6 +0,0 @@
-#!/bin/bash
-#
-echo 0 >/sys/class/net/ens8/device/sriov_numvfs
-ifconfig ens8.100 down
-vconfig rem ens8.100
-ifconfig ens8 down

roles/tsg-env-mcn2/tasks/main.yml

@@ -1,30 +0,0 @@
----
-- name: "copy setup script"
-  copy:
-    src: "{{ role_path }}/files/setup"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-
-- name: "copy switch_control_client_non_block"
-  copy:
-    src: "{{ role_path }}/files/switch_control_client_non_block"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-    
-- name: "copy tsg-env.service"
-  copy:
-    src: "{{ role_path }}/files/tsg-env.service"
-    dest: "/usr/lib/systemd/system/"   
-    mode: 0644 
-    
-- name: "copy tsg-env_stop"
-  copy:
-    src: "{{ role_path }}/files/tsg-env_stop"
-    dest: "/opt/tsg/env/"   
-    mode: 0755
-
-- name: "enable tsg-env"
-  systemd:
-    name: tsg-env
-    enabled: yes
-    daemon_reload: yes

roles/tsg-env-mcn3/files/setup

@@ -1,115 +0,0 @@
-#!/bin/bash
-# set -x
-
-CURRENT_PATH=`dirname $0`
-TP_SVR=192.168.100.5
-TP_PORT=10000
-REMOTE_CONTROL_BIN=switch_control_client_non_block
-modprobe 8021q
-
-function get_netdev_by_pci()
-{
-  DEV_LIST=`ifconfig -a |grep flags |awk -F: '{print $1}'`
-  for i in ${DEV_LIST}
-  do
-    ethtool -i ${i} |grep bus-info |grep "$1" > /dev/null 2>&1
-    if [ $? -eq 0 ];then
-      TARGET=${i}
-      break
-    fi
-  done
-
-  echo ${TARGET}
-}
-
-function pf_setup()
-{
-  ifconfig ens8 up
-  vconfig add ens8 100
-  vconfig set_flag ens8.100 1 1
-  ifconfig ens8.100 192.168.100.4 netmask 255.255.255.0 up
-  sleep 1
-}
-
-function vf_setup()
-{
-  echo 4 > /sys/class/net/ens8/device/sriov_numvfs
-  sleep 5
-
-  ifconfig ens8f3 up
-  ip link set ens8 vf 2 vlan 200
-  ifconfig ens8f3 192.168.200.4 netmask 255.255.255.0
-
-  ifconfig ens8f1 up
-  ifconfig ens8f2 up
-  ifconfig ens8f3 up
-  ifconfig ens8f4 up
-  sleep 5
-}
-
-function bring_down_pfvf()
-{
-  echo 0 > /sys/class/net/ens8/device/sriov_numvfs
-  ifconfig ens8 down
-  sleep 3
-}
-
-# Main loop
-while :
-do
-  FAIL_FLAG=0
-
-  # Make sure PF is valid
-  ping ${TP_SVR} -c 1 
-  if [ $? -ne 0 ];then
-    echo "Please make sure switch board is up."
-    bring_down_pfvf
-    pf_setup
-    continue
-  fi
-
-  # Make sure TestPoint is up.
-  ${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show version"
-  if [ $? -ne 0 ];then
-    echo "Cannot reach TestPoint!"
-    echo "Please make sure TestPoint is up and in remote-listen mode."
-    sleep 5
-    continue
-  fi
-
-  # Create VFs and get MAC addresses
-  vf_setup
-
-  PF=`get_netdev_by_pci 85:00.0`
-  VF1=`get_netdev_by_pci 85:00.1`
-  VF2=`get_netdev_by_pci 85:00.2`
-  VF3=`get_netdev_by_pci 85:00.3`
-  VF4=`get_netdev_by_pci 85:00.4`
-
-  MAC0=`ifconfig ${PF} |grep ether |awk -F' ' '{print $2}'`
-  MAC1=`ifconfig ${VF1} |grep ether |awk -F' ' '{print $2}'`
-  MAC2=`ifconfig ${VF2} |grep ether |awk -F' ' '{print $2}'`
-  MAC3=`ifconfig ${VF3} |grep ether |awk -F' ' '{print $2}'`
-  MAC4=`ifconfig ${VF4} |grep ether |awk -F' ' '{print $2}'`
-
-  # Make sure VFs are valid
-  MAC_TABLE=`${CURRENT_PATH}/${REMOTE_CONTROL_BIN} -s ${TP_SVR} -n ${TP_PORT} -c "show mac table all"`
-
-  for i in ${MAC0} ${MAC1} ${MAC2} ${MAC3} ${MAC4}
-  do 
-    echo ${MAC_TABLE} |grep ${i} > /dev/null 2>&1
-    if [ $? -ne 0 ];then
-      echo "MAC ${i} is not in table!"
-      FAIL_FLAG=1
-      break
-    fi
-  done
-
-  if [ ${FAIL_FLAG} -eq 1 ];then
-      bring_down_pfvf
-      continue
-  fi
-
-  echo "PF/VF setup successful."
-  exit 0
-done

roles/tsg-env-mcn3/files/tsg-env.service

@@ -1,15 +0,0 @@
-[Unit]
-Description=tsg sled-mcn3 env init
-Requires=network.target
-After=network.target
-Before=tfe-env.service mrenv.service
-
-[Service]
-ExecStart=/opt/tsg/env/setup
-ExecStop=/opt/tsg/env/tsg-env_stop
-Type=oneshot
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
-RequiredBy=tfe-env.service mrenv.service

roles/tsg-env-mcn3/files/tsg-env_stop

@@ -1,6 +0,0 @@
-#!/bin/bash
-#
-echo 0 >/sys/class/net/ens8/device/sriov_numvfs
-ifconfig ens8.100 down
-vconfig rem ens8.100
-ifconfig ens8 down

roles/tsg-env-mcn3/tasks/main.yml

@@ -1,30 +0,0 @@
----
-- name: "copy setup script"
-  copy:
-    src: "{{ role_path }}/files/setup"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-
-- name: "copy switch_control_client_non_block"
-  copy:
-    src: "{{ role_path }}/files/switch_control_client_non_block"
-    dest: "/opt/tsg/env/"   
-    mode: 0755   
-    
-- name: "copy tsg-env.service"
-  copy:
-    src: "{{ role_path }}/files/tsg-env.service"
-    dest: "/usr/lib/systemd/system/"   
-    mode: 0644
-    
-- name: "copy tsg-env_stop"
-  copy:
-    src: "{{ role_path }}/files/tsg-env_stop"
-    dest: "/opt/tsg/env/"   
-    mode: 0755
-
-- name: "enable tsg-env"
-  systemd:
-    name: tsg-env
-    enabled: yes
-    daemon_reload: yes